Recent content by Stanglover

Welcome from SW Ontario Canada.

I've got to admit, that is strange to say the least!! An unbelievable "law" to say the least. I get that you want to bypass the yearly inspection, but not being able to drive at dusk or night is totally ridiculous. Do the state "idiots" think the car might fall apart after dark??

If it works, job done! However, being as you have the old pump basically stripped, why not pull it apart and see if it's ok inside. I suggest taking pics as you go through it so you assemble it correctly. However, if shaft steel bushing is worn, i.e. the shaft can move (other than go round of...

Well, while we're here talking of things found in our cars from the factory, I found 3 almost pristine build sheets in mine. Not to brag or anything, but 3 seems to be very unusual. Two were under the back under pad, driver side and the third was under the front seat under pad. I'll not post the...

I'll never claim to be an expert, but I have rebuilt a couple of pumps recently. In my case, it was leaks that needed to be fixed, but in the process, I went through the entire pump inner works. There is not much to these, but tolerances are very tight between the eccentric cam and the...

Talking of finding things in our cars that were dropped by line workers, I found a brake pedal rubber (4 speed car) under the front carpet under pad, so had been there since day 1. I still have it in my stash.

It's called a "Snow Ball Effect"!!

No, but you need a good one, not cheap. Good luck with your venture.

I found this Hella H4 lamp that has a "position bulb" built in. I'll order one and take a look at it. It may take a while to get it, slow delivery time, but a possibility. I think it will need modifying so the second bulb works as a DRL. It's worth a try. Sorry, the link I found shows some of my...

That's an excellent suggestion, thank you. I think I/we are all thinking along the same lines now. It is a pity however that members with standard grills won't be able to tap into this idea. That said, there might be a way to add DRL's by utilizing conversion headlight lamps that have a...

I've done the same thing using the lower lamps, but then the rear lights are on as well and that may confuse people behind. However, I don't understand why you can only drive in daylight. I know the US has some weird laws, but that doesn't make any sense to me. What I need to do is find the best...

Ah, thank you for your very good explanation. That clears up my question and I'm sure, useful to others. So, all will be good once done.

Rereading my comment, I realized I should have said LED turn signal lights, back and front, not just the LED's in the dash display. I remember now I did have to do a little tweaking to get good grounds on the circuit board and clean the copper strip as well.

That's worth considering Chris. However, the current bulb sockets are not grounded directly, but through the wiring. I'm far from being an electrical 'guy', but I'm open to all suggestions and ideas. Who knows, other might also be thinking of running DRL's. In Ontario and no doubt in the US as...

Dash LED's have been written about a zillion times. The one's I bought from www.HiPoParts.com , the Elite Series II, all had the pos side marked. I bought all my LED's from Bill with the exception of the headlight LED's NOTE: installing LED turn signal bulbs require a grounded LED flasher on...