• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[WTB] WTB 351c std block
#1
Looking for a Standard block that can be bored.
Or a fresh .030 over one.
Would prefer 4bolt, but would consider 2bolt.
Located in Houston Texas.
Can text me at (832) 833-0893
Mike



Sent from my iPhone using Tapatalk
  Reply
#2
You can buy new blocks in iron or aluminum. Meyer just came out with them a couple months back. I do not know price probably in this info. https://www.tmeyerinc.com/product/track-...and-block/
The new blocks are much stronger and can go way over on the C.I..
I am running a .050" over block with flat top pistons and 2-V heads with no issues. I do run ethanol free.
I would recommend you not buy a block already bored. You need your pistons before you bore so you can hone for the correct clearances. If you use cast pistons and it is bored for Forged it will have way too much clearance.
I picked one up last year with crank and rods for $500 from one of the members.
There is also a facebook page for Clevelands and stuff for sell for them. Meyer has info there also.
2 bolt and 4 bolt blocks are exactly the same and can be machined for the 4 bolt caps. Unless you are going to punish it you will never know the difference.
Casting numbers are even the same on 2 bolt as 4 bolt you have to look inside to know for sure.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#3
How soon do you need one
I have 5-6 candidates - need to be disassembled and checked
[+] 1 user Likes OMS's post
  Reply
#4
Well, I’m stuck in mud until I get a replacement.
Searching all options at this point.


[Image: 78b1513e510906ed430635ef0d07d289.jpg][Image: 411b8ab9c12c451f3fb9ac30b8cd086f.jpg]


Sent from my iPhone using Tapatalk
  Reply
#5
Here is link to the Cleveland facebook page. Might be something there or post a WTB ad there.
https://www.facebook.com/search/top/?q=3...SEARCH_BOX


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#6
Shouldn't be too hard to locate a 351C block in Texas.

Here's the 351C forum

http://351c.net/board/

This guy has a bunch of Cleveland parts in Arlington, TX. Might be worth an email.

http://351c.net/board/index.php?/topic/4...0-headers/



Another thought might be to contact one of the builders like Tim Meyer who specializes in Clevelands, supply him with your parts and have him spec out and build the engine for you.


  Reply
#7
Got a couple good leads today..
Still working it...




Sent from my iPhone using Tapatalk
  Reply
#8
Do you guys have a recommendation on front sump oil oversized T pan for a 68 coupe 351c?




Sent from my iPhone using Tapatalk
  Reply
#9
(03-28-2019, 08:45 PM)mikeyhunts Wrote: Do you guys have a recommendation on front sump oil oversized T pan for a 68 coupe 351c?




Sent from my iPhone using Tapatalk

https://kevkoracing.com/collections/ford...e-drag-pan
I have of couple of these, stout and work well
[+] 1 user Likes Canted 393's post
  Reply
#10
https://www.summitracing.com/parts/mor-2.../make/ford


  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  WTB 69 to 73 sport mirrors LH or RH rackerm 3 160 08-17-2019, 07:18 PM
Last Post: rackerm
  [WTB] 351C Oil Dipstick and Tube AOCUSNRET 1 232 08-17-2019, 07:57 AM
Last Post: bossdriver
  wtb front seat sliders B229218 1 137 07-18-2019, 02:23 PM
Last Post: OMS
  WTB Park Brake warning Light lens and bezel Jcarro21 2 269 06-29-2019, 04:44 PM
Last Post: Carolina_Mountain_Mustangs
  WTB good steel Wired Customs LLC 5 295 06-24-2019, 08:19 AM
Last Post: Fabrice
  WTB 351C 2V PASSENGER EXHAUST MANIFOLD Cudben 6 547 06-24-2019, 07:42 AM
Last Post: OMS
runninpony WTB 71 Mach 1 auto to top loader swap. Need parts! MSteng890 9 478 06-17-2019, 10:22 AM
Last Post: Carolina_Mountain_Mustangs
  WTB Trunk Floor Patch & Gas Tank 73 rjpohl 17 855 06-11-2019, 09:02 PM
Last Post: shopcarpro



Users browsing this thread: 1 Guest(s)