• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[WTB] WTB: 1973 Mach One Grill Moulding top strip
#1
I am looking for a used moulding for the top or bottom for the 1973 Mach one style grill!

Thanks

Mustang

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#2
(09-22-2018, 07:19 PM)mustang7173 Wrote: I am looking for a used moulding for the top or bottom for the 1973 Mach one style grill!

Thanks

Mustang

I think I have them just finding will be issue. I cannot un stack the bins to look for it with disc crushed in my neck. I will walk around and see if I spot them. They do repo them also. Do not know how they fit. I complained personally to Daniel Carpenter his repo clips for the trim are too small and will not hold it on the grill. You have to bend the stainless to get it to stay on.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#3
Hello David,

I completely understand! I believe the 71-72 grill trim is thinner! The 73 grill trim is wider! I have a set of two with one thin and one wide. That makes me wonder about my NOS clips I have. Please let me know if find the wide pieces! I hope get well soon!


Sent from my iPhone using Tapatalk

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#4
(09-23-2018, 09:30 AM)mustang7173 Wrote: Hello David,

I completely understand! I believe the 71-72 grill trim is thinner! The 73 grill trim is wider! I have a set of two with one thin and one wide. That makes me wonder about my NOS clips I have. Please let me know if find the wide pieces! I hope get well soon!


Sent from my iPhone using Tapatalk

If David can't find his, let me know and I will run down to the garage and look for one for you.

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#5
Hello motor city mustang,

Please go ahead and look! I hear the repos are not very good!

Thank you!

Mustang7173


Sent from my iPhone using Tapatalk

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#6
All,

I need to figure out if it the top or bottom I need.

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#7
The repro trim for the 73 grille is made on the original Ford tooling


EDIT... not sure when it changed but Carpenters upper / lower trim D3ZZ-8419-C is NOT OE tooling anymore - they are imported

The LH and RH side ones still are USA made on OE tooling

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#8
(09-24-2018, 05:11 AM)mustang7173 Wrote: Hello motor city mustang,

Please go ahead and look! I hear the repos are not very good!

Thank you!

Mustang7173


Sent from my iPhone using Tapatalk

Here are the pictures of the grille molding.  Keep in mind the grille is upside down, so the molding on the top (with the small dent) is actually the bottom molding.


Attached Files
.jpg   IMG_4268.jpg (Size: 139.28 KB / Downloads: 44)
.jpg   IMG_4269.jpg (Size: 122 KB / Downloads: 43)
.jpg   IMG_4270.jpg (Size: 128.01 KB / Downloads: 41)

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#9
Motorcity Mike, upper and lower are the same on 73 D3ZZ-8419-C is the Ford # so you have him covered thumb

Mustang 7173 - Mike has what you need and is good to deal with.

If you have 3 used - get the the 4th one used from Mike so it is a better match VS a new one and 3 used



We have ones made in North Carolina at Daniel Carpenters shop on the original Ford tooling - only complaint I have had is when UPS bends them, they don't fit well 
There is a imported version by another manufacturer


EDIT... not sure when it changed but Carpenters upper / lower trim D3ZZ-8419-C is NOT OE tooling anymore - they are imported
The LH and RH side ones still are USA made on OE tooling
  Reply
#10
(09-27-2018, 08:36 AM)OMS Wrote: Motorcity Mike, upper and lower are the same on 73 D3ZZ-8419-C is the Ford # so you have him covered thumb

Mustang 7173 - Mike has what you need and is good to deal with.

If you have 3 used - get the the 4th one used from Mike so it is a better match VS a new one and 3 used



We have ones made in North Carolina at Daniel Carpenters shop on the original Ford tooling - only complaint I have had is when UPS bends them, they don't fit well Big Grin
There is a imported version by another manufacturer

Thanks Don!

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  WTB:7173VERT BODIES/UNFINISHED PROJECTS kevken1959 0 48 9 hours ago
Last Post: kevken1959
  WTB: 72 AM/FM 8-trac and Sprint Promo Items & Ertl 1:18 Die Cast Jonhawayek 5 168 02-12-2019, 09:38 AM
Last Post: Carolina_Mountain_Mustangs
  WTB - 71 Convetible decklid MikeGriese 13 347 02-11-2019, 10:03 PM
Last Post: MikeGriese
  WTB: 1971 429 CJ JCougarTopless 5 298 01-25-2019, 01:02 PM
Last Post: JCougarTopless
  WTB Trunk Floor Patch & Gas Tank 73 rjpohl 14 471 01-20-2019, 11:38 PM
Last Post: secluff
  WTB door speaker wiring harnesses 72conv 10 824 01-17-2019, 08:14 PM
Last Post: MikeGriese
  interior door parts 1973 - FOUND rjpohl 9 335 01-14-2019, 08:25 PM
Last Post: Motorcity Mustang
  {WTB} 15 x 10 Inch Crager SS wheels with 5.5 inch backspacing mistercool98 2 170 01-11-2019, 04:01 PM
Last Post: mistercool98



Users browsing this thread: 1 Guest(s)