• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WTB Trunk Floor Patch & Gas Tank 73
#1
The PO had cut a hole in the trunk for clearance on tank (pic 3) he used.  I'd like to just replace the middle with a patch.  Pic 1 shows the patch piece needed, pic 2 is off the hole in trunk now that would be cut to match the patch.  I also need a tank, not sure if I can find both these items from the same place.  
Shipping would be to 40228 (louisville, KY)
Please email me at bob.pohlmann@gmail.com with price.
Thanks
Bob


[Image: trunk-pan-A.jpg]
[Image: IMG-2724.jpg]

[Image: IMG-2723.jpg]
  Reply
#2
The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#3
(01-18-2019, 04:08 PM)Carolina_Mountain_Mustangs Wrote: The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]
Thanks for the reply.  What a shame, that mustang was beautiful.
Bob
  Reply
#4
(01-18-2019, 04:19 PM)rjpohl Wrote:
(01-18-2019, 04:08 PM)Carolina_Mountain_Mustangs Wrote: The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]
Thanks for the reply.  What a shame, that mustang was beautiful.
Bob

It was a sad day when I picked it up. He ordered the car new, one owner, dated in the car got married in the car. He raised two boys in the car and they drove it in his funeral procession. One of the sons was out and someone ran into the rear and knocked it into another car. Had just had the top put on, had heads pulled and valve job, ceramic coated headers and dual Pypes stainless exhaust installed. It still rand and drove. Great parts car but not worth fixing. Was really rare MM did a center story about this model 351 2-V with three speed they only made 82 of them.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#5
I may be able to assist you....I have a trunk pan that I cut out --in 2 pieces that could be welded and seamed as one....and a used tank from my 73 Mach 1 in great condition.....

Let me know if you are interested and I can get some pics....


Anthony
  Reply
#6
(01-18-2019, 07:23 PM)arursini Wrote: I may be able to assist you....I have a trunk pan that I cut out --in 2 pieces that could be welded and seamed as one....and a used tank from my 73 Mach 1 in great condition.....

Let me know if you are interested and I can get some pics....


Anthony

Pics would be great, thanks
  Reply
#7
I have a couple of used gas tanks to choose from. Both would clean up nicely and are from '71's. $50 shipped.

Sorry - meant plus shipping.

---
Mike
  Reply
#8
https://www.1aauto.com/1971-73-ford-must...A8QAvD_BwE


  Reply
#9
(01-19-2019, 08:35 PM)Hemikiller Wrote: https://www.1aauto.com/1971-73-ford-must...A8QAvD_BwE

Hmmm...  looks like my tanks may becoming scrap soon.

---
Mike
  Reply
#10
Here is another one...$89 shipped.

https://www.ebay.com/itm/20-Gallon-Fuel-...:rk:1:pf:0

Jeff
1972 Q Code Convertible
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  WTB:7173VERT BODIES/UNFINISHED PROJECTS kevken1959 0 82 02-16-2019, 09:40 AM
Last Post: kevken1959
  WTB: 72 AM/FM 8-trac and Sprint Promo Items & Ertl 1:18 Die Cast Jonhawayek 5 182 02-12-2019, 09:38 AM
Last Post: Carolina_Mountain_Mustangs
  WTB - 71 Convetible decklid MikeGriese 13 365 02-11-2019, 10:03 PM
Last Post: MikeGriese
  WTB: 1971 429 CJ JCougarTopless 5 306 01-25-2019, 01:02 PM
Last Post: JCougarTopless
  WTB door speaker wiring harnesses 72conv 10 827 01-17-2019, 08:14 PM
Last Post: MikeGriese
  {WTB} 15 x 10 Inch Crager SS wheels with 5.5 inch backspacing mistercool98 2 171 01-11-2019, 04:01 PM
Last Post: mistercool98
  WTB 351C 2V PASSENGER EXHAUST MANIFOLD Cudben 3 289 01-11-2019, 02:53 PM
Last Post: mistercool98
  [WTB] WTB- 429 Ram air cleaner Rozz 3 257 01-06-2019, 06:40 PM
Last Post: Rozz



Users browsing this thread: 1 Guest(s)