• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WTB transmission inspection cover plate C-4
#1
I keep forgetting to ask if anyone has the inspection cover that bolts to the bottom front of the automatic transmission for a C-4. I know C-4 did not come in 351 but PO swapped it out and did not put the cover in place. Where you unbolt the torque converter.
Thanks,


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#2
brand new zinc plated fresh from China 14.95 shipped to your door
eBay item number:
362173525395
  Reply
#3
(07-02-2019, 12:47 PM)Carolina_Mountain_Mustangs Wrote: I keep forgetting to ask if anyone has the inspection cover that bolts to the bottom front of the automatic transmission for a C-4. I know C-4 did not come in 351 but PO swapped it out and did not put the cover in place. Where you unbolt the torque converter.
Thanks,
Did you ever find one?  Will a fmx plate fit? I thought it would? 

Let me know
Rod
  Reply
#4
No I did not get one do not think about it unless car is on lift, lol. I do not know if FMX will fit or not not up on AT parts.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#5
(12-03-2019, 11:56 AM)Carolina_Mountain_Mustangs Wrote: No I did not get one do not think about it unless car is on lift, lol. I do not know if FMX will fit or not not up on AT parts.
I will do some checking. Rod
  Reply
#6
(12-03-2019, 12:49 PM)machattack Wrote:
(12-03-2019, 11:56 AM)Carolina_Mountain_Mustangs Wrote: No I did not get one do not think about it unless car is on lift, lol. I do not know if FMX will fit or not not up on AT parts.
I will do some checking. Rod
Here is what I found out on the plate. I copied and pasted it below. I did measure mine and its measures the below measurements.

This inspection plate covers the lower section of the bellhousing. This allows for access to inspection torque converter as well as keep debris out of the bellhousing.
FMX and C4 with 164 Tooth Large Bellhousing

Measurements: From bolt hole center to center are 6 1/16 inches. Total width of plate is 10 1/4 inches height of plate is 4 1/8 inches
  Reply
#7
Will the C6 cover work?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
#8
I made the mistake of assuming " one size fits all " - no it doesn't . Got the correct version from NPD.

You will need C 4 style to suit same trans you have.

See OMS reply above. He's on to it as usual.
PKJ
  Reply
#9
(12-03-2019, 03:58 PM)6DUB606 Wrote: I made the mistake of assuming " one size fits all " - no it doesn't .  Got the correct version from NPD.

You will need C 4 style to suit same trans you have.

See OMS reply above.  He's on to it as usual.
PKJ
I feel the need to defend myself here. Or if the company's on the internet made a error apologize for them.
So...........You tried a fmx on a c-4 transmission bell? Or v/s? 
The internet says c-4 and fmx are a match ( as I copied and pasted in prior message) and I measured my fmx plate and it is exact from the #s they posted for the 2 trannys and there bells.

The plate measurement #s I posted is for fitment to the Bell housing. I also took a picture of a line trace drawing with
measurements.
.[Image: DSC04020.jpg]
  Reply
#10
(12-03-2019, 08:13 PM)machattack Wrote:
(12-03-2019, 03:58 PM)6DUB606 Wrote: I made the mistake of assuming " one size fits all " - no it doesn't .  Got the correct version from NPD.

You will need C 4 style to suit same trans you have.

See OMS reply above.  He's on to it as usual.
PKJ
I feel the need to defend myself here. Or if the company's on the internet made a error apologize for them.
So...........You tried a fmx on a c-4 transmission bell? Or v/s? 
The internet says c-4 and fmx are a match ( as I copied and pasted in prior message) and I measured my fmx plate and it is exact from the #s they posted for the 2 trannys and there bells.

The plate measurement #s I posted is for fitment to the Bell housing. I also took a picture of a line trace drawing with
measurements. Check EBAY ITEM # 372743637875 it also states this fits both c4 and fmx looks like they sold 18 of them, I would have thought someone would have complained they didnt fit?

.[Image: DSC04020.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1972 c6 transmission machattack 1 278 12-03-2019, 12:24 AM
Last Post: machattack



Users browsing this thread: 1 Guest(s)