• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[WTB] Spark plug wires (set)
#1
Hi guys,

I am searching for a set of Spark plug wires concourse correct from Motorcraft for my 1973 351C 4V - they are all sold out!

Are there any differences between a Set for a 1973 351C or a 302? For me it seems to be not...

Thank you

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
#2
The 351 is longer and wider. At least half of the 302 wires will likely be too short.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
Don C;241618 Wrote:The 351 is longer and wider. At least half of the 302 wires will likely be too short.

Aaah, ok, good to know, thank you very much thumb

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
#4
Tim the only ones available at this time are for the 70 -71 351C
They will fit fine but have autolite instead of motorcraft markings
Don

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#5
OMS;241630 Wrote:Tim the only ones available at this time are for the 70 -71 351C
They will fit fine but have autolite instead of motorcraft markings
Don

Don,

yes, thanks, I know, these are the only ones which are available now. What happened to the others - no supplies?

Difficult decision if I should go with some 70/71-wires... On the other hand my engine is a mixture beetween a 1970 and 1973 Cleveland.

I have to sleep over it!

Tim

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
#6
This is what I used Motorcraft WR3820DR Spark Plug Wire Set. Amazon sell them for 30.00 bucks on my 351 4V. They are not concourse but they are Motorcraft and good quality and the wires are long enough.


John J
  Reply
#7
Hi John,

thank you - that sounds like a good compromise... thumb

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
#8
Tim maybe try some of the GT shops in Australia, you may find what you need there as some of these places do concourse restos on Falcon GT's and the XA's on used Motorcraft equipment. Can only give it a go.
  Reply
#9
4Vforever;241729 Wrote:Tim maybe try some of the GT shops in Australia, you may find what you need there as some of these places do concourse restos on Falcon GT's and the XA's on used Motorcraft equipment. Can only give it a go.

That's a good idea - haven't that in mind - I will go over there and searching a set to bring it from continent to continent thumb

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
#10
Hi Tim,
Here you go, just what you were after
http://www.ebay.com.au/itm/Ford-Falcon-X...43e285aef5
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  WTB Horn Set Bru 5 519 03-18-2018, 12:09 PM
Last Post: NOT A T5
  [WTB] Nice Set Of 1971 Interior Quarter Panels 4mm 12 1,768 07-30-2017, 09:36 AM
Last Post: 4mm
  [WTB] Forged aluminum wheels 1973 or a really nice set sport wheel covers JD79 3 769 04-30-2017, 09:52 AM
Last Post: JD79
  Valve cover spark plug wire holding brackets 1mach1 5 806 10-13-2016, 08:07 PM
Last Post: 1mach1
  [WTB] Plug pigtail off GM HEI pickup coil cudak888 0 452 09-30-2015, 08:19 PM
Last Post: cudak888
  WTB 351C Power Steering Set 164309 3 920 09-13-2015, 03:15 PM
Last Post: Mikes73
runninpony [WTB] 1973 Fast back tack strip set ups Richelsberry 1 560 08-28-2015, 09:35 AM
Last Post: OMS
  Looking for a vaccum advance plug 72HCODE 0 447 08-27-2014, 12:41 AM
Last Post: 72HCODE



Users browsing this thread: 1 Guest(s)