• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WTB several 1973 parts
#1
Hi Guys,

I am looking for the following parts for my Q-code convertible:

- 1973 Front valance bright molding strips ( part of the decor group )
- 1973 chrome rear bumper guards ( ideally show quality/NOS )
- 1973 urethane front bumper 
- green tinted quarter window glass 1973 convertible passenger/driver side
- valve covers for 351C 4v engine  ( My ones have the imprinted ford motorsport logo. Is this aftermarket? )

Thanks,

Jeroen
  Reply
#2
Not sure if the coupe and vert windows are the same but these are close to me.... (as in right down the street)

https://cedarrapids.craigslist.org/pts/5941595179.html

What should the 4v valve covers look like? If they are the same as the 2v valve covers I have a used set. Will need cleaned up and painted but no dents.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#3
(02-23-2017, 10:56 AM)73pony Wrote: Not sure if the coupe and vert windows are the same but these are close to me.... (as in right down the street)

https://cedarrapids.craigslist.org/pts/5941595179.html

What should the 4v valve covers look like? If they are the same as the 2v valve covers I have a used set. Will need cleaned up and painted but no dents.

Hi Jason,

Thanks for the reply! The vert windows have a different shape. I think the valve covers are the same on the 2V and 4V as long as it is a 351C and not a 351W. ( is the used set from your 1973 Grandé ? )

Jeroen
  Reply
#4
The set I have is from my 73 Grandé. I will grab a photo of them tonight and post for you.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#5
(02-23-2017, 05:29 PM)73pony Wrote: The set I have is from my 73 Grandé. I will grab a photo of them tonight and post for you.

Thanks!
  Reply
#6
Good luck finding the front 73 bright trims, took me years before finding some. The Ford Motorsport rocker covers are they the chrome or tall polished ones. 4V rocker covers usually have the power by Ford and Ford logo stamped in them, but have seen original later 4V engines with just plain Ford logo stamped on them. If yours are the tall Ford Motorsport type ones, I'd work out a deal with you with some 72 Q code ones I got, as I'm chasing a pair of tall Ford Motorsport ones. So if all else fails elsewhere with rocker covers let me know. Actually PM me a pic of your rocker covers if you can.          Pp
  Reply
#7
Here are the valve cover pics. They would need to be stripped and repainted. No dents though.


Attached Files Thumbnail(s)
       

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#8
(02-23-2017, 06:54 PM)73pony Wrote: Here are the valve cover pics. They would need to be stripped and repainted. No dents though.

Thanks Jason! 

I've added a photo of the ones I have on my engine. I created a new thread about the valve covers. Hopefully somebody can give me some advise if these are original on a '73 4V engine...
[Image: IMG_20170223_130603.jpg]
  Reply
#9
(02-23-2017, 06:27 PM)4Vforever Wrote: Good luck finding the front 73 bright trims, took me years before finding some. The Ford Motorsport rocker covers are they the chrome or tall polished ones. 4V rocker covers usually have the power by Ford and Ford logo stamped in them, but have seen original later 4V engines with just plain Ford logo stamped on them. If yours are the tall Ford Motorsport type ones, I'd work out a deal with you with some 72 Q code ones I got, as I'm chasing a pair of tall Ford Motorsport ones. So if all else fails elsewhere with rocker covers let me know. Actually PM me a pic of your rocker covers if you can.          Pp

I've bought a set of the repro bright molding last month, unfortunately it comes with the 1972 front valance bright molding strips. I've added some photo's of my engines valve covers in a new thread.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  wtb front seat sliders B229218 1 72 Yesterday, 02:23 PM
Last Post: OMS
  1973 Mustang Coupe Interior Quarter Window Trim Panel - left and right, eddyw 2 103 07-16-2019, 06:44 PM
Last Post: Motorcity Mustang
  WTB Park Brake warning Light lens and bezel Jcarro21 2 186 06-29-2019, 04:44 PM
Last Post: Carolina_Mountain_Mustangs
  WTB good steel Wired Customs LLC 5 253 06-24-2019, 08:19 AM
Last Post: Fabrice
  WTB 351C 2V PASSENGER EXHAUST MANIFOLD Cudben 6 517 06-24-2019, 07:42 AM
Last Post: OMS
runninpony WTB 71 Mach 1 auto to top loader swap. Need parts! MSteng890 9 446 06-17-2019, 10:22 AM
Last Post: Carolina_Mountain_Mustangs
  WTB Trunk Floor Patch & Gas Tank 73 rjpohl 17 778 06-11-2019, 09:02 PM
Last Post: shopcarpro
  [WTB] WTB Rear Deck/Package Tray AOCUSNRET 9 971 06-11-2019, 04:17 PM
Last Post: Mister 4x4



Users browsing this thread: 1 Guest(s)