• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[WTB] Need pass. disc brake spindle - 71
#1
Hello Everyone,

I'm in need of a passenger side disc brake spindle for my 71 Mach 1.  Possibly the driver's side as well.

Thank you!!!   Thankyouyellow

Scott
  Reply
#2
(11-09-2018, 01:27 PM)Monterey Wrote: Hello Everyone,

I'm in need of a passenger side disc brake spindle for my 71 Mach 1.  Possibly the driver's side as well.

Thank you!!!   Thankyouyellow

Scott

I may have a pair already off a Mustang.  Let me look this weekend for you.

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#3
(11-10-2018, 01:21 AM)Motorcity Mustang Wrote:
(11-09-2018, 01:27 PM)Monterey Wrote: Hello Everyone,

I'm in need of a passenger side disc brake spindle for my 71 Mach 1.  Possibly the driver's side as well.

Thank you!!!   Thankyouyellow

Scott

I may have a pair already off a Mustang.  Let me look this weekend for you.

Here are pictures of the disc brake spindles that are on the shelf.  They have not been cleaned up or beadblasted yet.


Attached Files
.jpg   IMG_4959.jpg (Size: 106.25 KB / Downloads: 39)
.jpg   IMG_4960.jpg (Size: 105.66 KB / Downloads: 39)
.jpg   IMG_4961.jpg (Size: 100.25 KB / Downloads: 39)

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#4
Are the bearing surfaces in good condition? It’s a little hard to tell from the pics.


Sent from my iPhone using Tapatalk
  Reply
#5
(11-10-2018, 06:06 PM)Monterey Wrote: Are the bearing surfaces in good condition?  It’s a little hard to tell from the pics.  


Sent from my iPhone using Tapatalk

Bearing surfaces are good, still has some grease on them.  The natural parts are rusty, but the spindles and attaching brackets will beadblast fine.  You may have some pinholes in the backing plates (not positive), but they have quite a bit of rust on those.

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#6
I have a pair on disk 73 parts car about 25 miles south of the California / Oregon border on I5. I'd have to pull the hubs off first to see if the spindle where the race rides is decent or not, but it is close enough that you could go on a long day trip to get them if you are in a hurry.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Brake/Fuel Line Clips NOT A T5 10 345 10-16-2018, 04:52 AM
Last Post: NOT A T5
runninpony Original Brake Fluid Reservoir Cap NOT A T5 5 333 08-23-2018, 05:02 AM
Last Post: NOT A T5
  WTB: pass side interior quarter panel johnwanzel 3 595 01-01-2018, 08:29 PM
Last Post: johnwanzel
  Want an NOS or really nice 1971-1973 Parking brake on dash light bezel, a kevken1959 0 365 12-19-2017, 09:44 PM
Last Post: kevken1959
  [WTB] Brake pedal for '71 power brake manual transmission MikeGriese 6 1,037 08-14-2017, 04:22 PM
Last Post: MikeGriese
  [WTB] 14" Magnum 500 Disc Brake Wheels jowens1126 0 337 07-17-2017, 09:04 PM
Last Post: jowens1126
  [WTB] 70-73 drum brake spindles (and hubs if you have them) Bentworker 9 669 03-30-2017, 05:57 PM
Last Post: Bentworker
  [WTB] 71-73 Drum Brake Spindles Tubo 3 605 04-01-2016, 09:10 PM
Last Post: Tubo



Users browsing this thread: 1 Guest(s)