• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WTB - 71 Convetible decklid
#11
(02-10-2019, 05:40 PM)Carolina_Mountain_Mustangs Wrote: No spoiler on verts or coupes. Not even the Spring Specials got a spoiler.
The holes do fall inside the reinforcement and I have one that PO put spoiler on. His holes look like crap also. You can take a air grinder and round out the hole to look better but was never meant to be.
I have a couple trunks also. A 71 will have the holes for the MUSTANG letters. 72 & 73 have the script Mustang on the right side.

Really?  My '71 always had taped on letters - not pins.  I prefer a good '71 as I wouldn't have to fill the holes for the script.

---
Mike
  Reply
#12
(02-10-2019, 07:48 PM)MikeGriese Wrote:
(02-10-2019, 05:40 PM)Carolina_Mountain_Mustangs Wrote: No spoiler on verts or coupes. Not even the Spring Specials got a spoiler.
The holes do fall inside the reinforcement and I have one that PO put spoiler on. His holes look like crap also. You can take a air grinder and round out the hole to look better but was never meant to be.
I have a couple trunks also. A 71 will have the holes for the MUSTANG letters. 72 & 73 have the script Mustang on the right side.

Really?  My '71 always had taped on letters - not pins.  I prefer a good '71 as I wouldn't have to fill the holes for the script.

Mike if you want to add a spoiler to a coupe or convertible... use a 69-70 version
The center distance is more in line with the trunk bracing - just used threaded rod instead of the supplied bolts.
Then you can come thru the bracing cleanly, instead of hacking big holes
The other plus is the 69-70 spoiler is taller so the ends clear the quarter panel better.
  Reply
#13
(02-10-2019, 07:48 PM)MikeGriese Wrote:
(02-10-2019, 05:40 PM)Carolina_Mountain_Mustangs Wrote: No spoiler on verts or coupes. Not even the Spring Specials got a spoiler.
The holes do fall inside the reinforcement and I have one that PO put spoiler on. His holes look like crap also. You can take a air grinder and round out the hole to look better but was never meant to be.
I have a couple trunks also. A 71 will have the holes for the MUSTANG letters. 72 & 73 have the script Mustang on the right side.

Really?  My '71 always had taped on letters - not pins.  I prefer a good '71 as I wouldn't have to fill the holes for the script.

Mike, you are correct. The '71 only trunk lid "Mustang" letters were stick on type, not the pin-and-retainer style of the earlier cars.


  Reply
#14
(02-11-2019, 11:18 AM)OMS Wrote: Mike if you want to add a spoiler to a coupe or convertible... use a 69-70 version
The center distance is more in line with the trunk bracing - just used threaded rod instead of the supplied bolts.
Then you can come thru the bracing cleanly, instead of hacking big holes
The other plus is the 69-70 spoiler is taller so the ends clear the quarter panel better.

Thanks!  I'll consider it.  I'm planning to have two decklids handy - one with the spoiler, one without.  That way I can change my mind without mucking things up too badly.

---
Mike
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  WTB Park Brake warning Light lens and bezel Jcarro21 2 178 06-29-2019, 04:44 PM
Last Post: Carolina_Mountain_Mustangs
  WTB good steel Wired Customs LLC 5 249 06-24-2019, 08:19 AM
Last Post: Fabrice
  WTB 351C 2V PASSENGER EXHAUST MANIFOLD Cudben 6 516 06-24-2019, 07:42 AM
Last Post: OMS
runninpony WTB 71 Mach 1 auto to top loader swap. Need parts! MSteng890 9 445 06-17-2019, 10:22 AM
Last Post: Carolina_Mountain_Mustangs
  Wanted! Fastback decklid torsion springs (w spoiler) Spechti 8 1,356 06-11-2019, 11:43 PM
Last Post: knn
  WTB Trunk Floor Patch & Gas Tank 73 rjpohl 17 776 06-11-2019, 09:02 PM
Last Post: shopcarpro
  [WTB] WTB Rear Deck/Package Tray AOCUSNRET 9 970 06-11-2019, 04:17 PM
Last Post: Mister 4x4
  WTB 73 351C 4V carburetor or carb base plate (D3ZF LA) mustang_maria73 1 181 05-02-2019, 02:31 PM
Last Post: c9zx



Users browsing this thread: 1 Guest(s)