• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(WTB) 1972 mach 1 pillar trim
#1
I'm looking for a pair of 1972 mach 1 pillar trims. RH and LH.
Any suggestions?
  Reply
#2
Best of luck. They are VERY had to find in decent shape! I'd check with Don (OMS) on here. He owns and operates Ohio Mustang Supply. My next source would be Mike (MotorCityMustang). Be careful as they are not all the same. I think some can be slightly modded to work on other body types.

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#3
Yep..another part that time and the sun hasn't been kind to. The windshield side garnish moulding (as Ford called them) was different between the three body styles. I believe there were some posts awhile back about some repo mouldings that no one seemed very impressed with. I talked with a friend who had bought a set and I can't print what he had to say about them here!! David (Carolina_Mountain_Mustangs)had asked earlier about ideals for interior parts needed where he could make a mold. If you have any ideals contact him. I'll start with the garnish mouldings.

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#4
I sent a nice set to Daniel Carpenter 2-3 or years ago.
He was considering doing them but thought they would be to expensive.
I have also talked to contacts at Dynacorn
Due to the complex mold and only fitting one body style
no one thinks it would be cost effective.
Then word came out about the Drake ones, which turned
out to be... well not great

Don

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  73 Mach 1 - Access Door Panel, Gauge Wiring Clip, Door Dome Light Switch spikhead 2 233 05-17-2019, 07:23 PM
Last Post: Motorcity Mustang
runninpony WTB 71 Mach 1 auto to top loader swap. Need parts! MSteng890 7 179 05-12-2019, 06:46 AM
Last Post: keiths71
  WTB 73 351C 4V carburetor or carb base plate (D3ZF LA) mustang_maria73 1 122 05-02-2019, 02:31 PM
Last Post: c9zx
  WTB rear 1/4 panel marker lites and vents in door jamb ron m 2 164 04-30-2019, 04:53 PM
Last Post: Motorcity Mustang
runninpony Windshield Pillar Molding/Posts MNMustang73 2 217 04-29-2019, 08:12 PM
Last Post: MNMustang73
  WTB 1973machi 1 117 04-22-2019, 06:40 PM
Last Post: OMS
  [WTB] WTB 351c std block mikeyhunts 14 604 04-07-2019, 01:51 PM
Last Post: mikeyhunts
  WTB DRUM BRAKE SPINDLES 70-73 Mustang lithi78 4 350 03-21-2019, 03:35 PM
Last Post: lithi78



Users browsing this thread: 1 Guest(s)