• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring Question
#1
I have a 71 mustang fastback the gauge feed harness wire that runs along the valve covers. One wire goes to temp, one wire to oil pressure, and a green and red stripped wire with a yellow cap any ideas where this connects to? I still have the original alternator setup with higher amps the regulator is still
[Image: Gauge_feed_harness.jpg]

mounted on the right fender. Any help would be very helpful.  Also where is the best place to to get my 12 volt feed for my carbs electric choke. Thanks
  Reply
#2
The coil.
  Reply
#3
(03-12-2018, 05:57 PM)midlife Wrote: The coil.

Your saying the green and red wire connects to the coil? Thanks
  Reply
#4
Yes sir, it does.
  Reply
#5
(03-12-2018, 07:48 PM)midlife Wrote: Yes sir, it does.

Thanks
  Reply
#6
On a Boss it connects into the Rev limiter
(Then those go to the coil)

mark
PS looks like a reproduction harness shown originals were like that)
If you need to know the way the wires were taped let us know
let us know
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Gauge cluster wiring Cainsable 7 195 07-09-2018, 03:05 PM
Last Post: Cainsable
  MSD 6AL wiring NicknRick 3 280 05-10-2018, 10:17 AM
Last Post: NicknRick
  73 with tach, alternator wiring question 71steed 12 982 05-05-2018, 09:31 PM
Last Post: Don C
  Horn and Steering Wheel question! turtle5353 9 542 03-23-2018, 10:44 PM
Last Post: eddyw
  Horn and turn signal question turtle5353 4 278 03-20-2018, 03:40 PM
Last Post: turtle5353
  Brake light switch and wiring shaheenk 5 353 03-18-2018, 03:56 AM
Last Post: shaheenk
  Alternator Wiring NicknRick 5 381 03-12-2018, 05:58 PM
Last Post: midlife
  Socket question rdm1952 0 227 03-10-2018, 10:15 PM
Last Post: rdm1952



Users browsing this thread: 1 Guest(s)