• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiper stabilizer arm pin
#1
My wiper stabilizer arm's pin is broken so I can't use the wipers. Is there any way to fix or replace the pin?

[Image: 1516648394-p.jpg]
  Reply
#2
Probably easier to replace the linkage itself. Check the classifieds, there were a couple guys parting cars out.


  Reply
#3
I have a spare wiper transmission linkage.  PM Me if interested.

kcmash
  Reply
#4
The clip on the transmission arm is a little tricky to get off. You have to lift the center part over the shaft and then slide the clip off. Would be a good time to clean the gear case and put new grease in while you have it out.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#5
(03-11-2019, 10:19 AM)Carolina_Mountain_Mustangs Wrote: The clip on the transmission arm is a little tricky to get off. You have to lift the center part over the shaft and then slide the clip off. Would be a good time to clean the gear case and put new grease in while you have it out.

@david
Do you have a pict of the assembly? I need do mine, and so far, found only this kind of small/pixelly picts.
http://mustangpartsdirect.com/index.php?...ct_id=6198
or
https://www.cjponyparts.com/wiper-motor-...3/p/WWMA4/
I'm after more details, especially the order in which it's bolted on (I recall the studs have some star heads), if there are washers or special parts (like the squarish spacer of the motor), things to pay attention to...
As they are in place for almost 50 years, is there some expected to be hard to reach and get loose nut? Was the hardware of good enough quality that should handle some torque with bits of oil...??

Any input welcome.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#6
Maybe these will help, illustration from the parts manual and instructions from the shop manual

[Image: 71-Mustang-Wiper-Parts.jpg]

[Image: 71-Wiper-Pivot-Shaft-Instructions.jpg]



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Search one original Convertible Dowel Pin Duck 1 142 07-09-2019, 07:06 AM
Last Post: Bill73Ragtop
  Use of Fuel Stabilizer goodnigh 13 714 01-25-2019, 04:32 PM
Last Post: Stanglover
Wrench Wiper motor issue John J 6 536 11-04-2018, 05:25 PM
Last Post: JimB73
  Windshield wiper pivot arm to cowl seal mustang7173 0 432 09-16-2018, 05:01 PM
Last Post: mustang7173
  wiper motor not working John J 5 637 07-24-2018, 08:51 PM
Last Post: John J
runninpony Windshield Wiper Mechanism NOT A T5 2 468 06-02-2018, 09:21 PM
Last Post: NOT A T5
  Wiper Switch Removal mudbilly 8 917 05-25-2018, 07:07 PM
Last Post: mudbilly
  Pitman Arm 73pony 11 1,267 02-19-2017, 04:25 PM
Last Post: vozaday



Users browsing this thread: 1 Guest(s)