• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiper Motor Install
#1
runninpony 
I had to buy a new wiper motor. It has been so long since I removed it. Any installation diagrams or videos would be helpful to reinstall it. Also, I have removed the original pigtail from the old motor. It looks like the connection from the motor to the feed was soldered and shrink wrapped together. Was this the factory way to connect? 
Also, what is the factory color to paint the mounting plate? 
[Image: 72_Motor.jpg]

.

Brian Kulis
  Reply
#2
Hi Brian,

I too went through the same procedure with a new motor. I simply cut off my original pigtail and soldered it onto the leads of the new motor. Shrink wrap the connections and slip over some protective wiring cover.

The connections if I remember were pretty straight forward, I followed the color coded wiring that came with the unit I had purchased through Rock Auto.

As for paint, I am not too sure about correct color. Someone else will have to answer that question. I painted the plate silver to resemble a natural steel color and also to break up the boring uniform black coating.

Make sure to keep the ground strap clean and free of paint as it needs to contact cowl assembly for proper motor operation.

Good Luck with install!

Marco

"When the world is running down you make the best of what's still around."- Sting and The Police




[Image: Indy-Auto-2019-Rpm-Autopassion-32.jpg]

1972 Ford Mustang Mach 1 (Father & sons restoration project)
 
- 351 Cleveland H-code w/ factory Ram-air induction

 - FMX 3-speed trans

 - 9-inch rear with 3.25:1 ratio
[+] 1 user Likes 72 H-code's post
  Reply
#3
This may help some, not a great picture. Chuck
[Image: IMG_0390.jpg]
[+] 1 user Likes c9zx's post
  Reply
#4
If i recall correctly the picture i saw of another members motor the body was black with the nyellow cover as in the picture posted C9ZX and the bracket was a metal unpainted. Will check mine tomorrow and post a pic

Steve
1971 Grandé
[+] 1 user Likes Pegleg's post
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  higher output blower motor adrose 13 459 07-31-2019, 11:48 AM
Last Post: adrose
  what year engine is a crate motor? 71fast 3 316 05-30-2019, 01:29 PM
Last Post: jowens1126
  rear side window motor jimchil 2 296 05-28-2019, 08:45 AM
Last Post: Carolina_Mountain_Mustangs
  Kickdown Rod Install on Edelbrock 1406 and FMX Rumblefish 3 291 05-10-2019, 02:45 PM
Last Post: Fabrice
  Stabilizer bar bushing install slowpoke17 1 199 04-21-2019, 09:12 AM
Last Post: SteveO_71
  Motor mounts identification? Mach-none 10 590 03-01-2019, 01:24 PM
Last Post: rackerm
  Shaker install Davehoser 7 556 01-20-2019, 04:59 AM
Last Post: luxstang
tach tachometer install markc 14 713 10-04-2018, 07:51 PM
Last Post: markc



Users browsing this thread: 1 Guest(s)