• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Where can I get theses bolts
#1
I went to install my quarter window guides and on one side I have bolts in the rocker and the other side is missing them? They are used to hold the bottom of rear quarter window guides in place. Anyone know where I can get them?
[Image: bolt1.jpg]

[Image: bolts2.jpg]

- Jim
  Reply
#2
I believe they are called "cage nuts", if what you want are the receiving part of a bolt.

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
#3
sdstang, what you need is 374251-S2 caged nut (1/4-20). Discontinued from Ford but is a AMK manufactured product (B-12033). They sell a 2 piece bag for $4.00, but unfortunately  they have a $30.00 minimum order. I would check with Don (OMS) or one of our on site venders that handle AMK products to see if that is a product they stock. The bolts if needed are 1/4-20x1/2".
You could also check with Don (OMS) or Mike @ Motor City Mustang to see if they might have some used ones since they both have parts cars

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#4
They look very similar to the ones that are used on 65 66 mustang front fender to rocker panels. 5/16" bolt type.
  Reply
#5
Do you guys know where I can buy them? Anyone have some laying around?

- Jim
  Reply
#6
Ñpd sells the ones stated for the 65
  Reply
#7
   
This is the one for the 65 front fender mount. It appears wider than what you have. Perhaps you could adapt or glean something from this reply.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  HELP !! 73 grill mounting bolts specs 83slimer 7 826 10-20-2016, 11:56 AM
Last Post: 83slimer
  Trunk Lid bolts digithead 1 436 06-13-2016, 08:40 PM
Last Post: rocket366
  Front Frame Rails and Bumper Bracket Bolts AOCUSNRET 2 754 04-23-2016, 01:20 PM
Last Post: AOCUSNRET
  Need source for seat track to floor bolts 4mm 3 709 05-10-2015, 10:12 PM
Last Post: 4mm
  CLEANING UP NUTS BOLTS Qcode351mach 2 1,089 10-07-2013, 12:10 PM
Last Post: Qcode351mach



Users browsing this thread: 1 Guest(s)