• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What seat is this
#1
[Image: A64792_B4_3034_4560_86_CB_7_CE82_A2_EEABC.jpg]

[Image: F3_B350_F9_9_C8_E_4867_9_B18_1_BFB93_E57_DFA.jpg]

the hole on the hinge is in the middle, Mustang seat hinges are on the edge, the frame and cover for mustang fit fine. But the hinge cover won’t fit, so I don't think is a mustang seat


Attached Files
.jpeg   0B3CED45-8CF3-4609-95C6-1E1A1E22F1B2.jpeg (Size: 16 KB / Downloads: 78)
  Reply
#2
You have an early 71 seat
There were 3 types of hinge covers
1st - had no hole just a snap in plastic tab [ looked like a plastic drywall anchor ] very early design
2nd version - had a screw going through the tab
3rd version - is the current screw on type


The early covers are hard to find.
You can epoxy a wall anchor to the back of the plastic trim - they never stayed on well though
Then you need to cut off the screw head and glue it in place to fill the hole in the plastic

It been a while but I think you and push the plastic as far down as possible then mark , drill and tap a new hole since it is offset
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Anybody have a drivers side seat bottom frame? scgamecock 2 160 09-10-2018, 08:34 AM
Last Post: scgamecock
  Fold down seat - bolts? Engine302 8 336 08-31-2018, 06:52 PM
Last Post: NOT A T5
  Who has installed thier own seat upholstery? scgamecock 20 624 08-29-2018, 08:13 PM
Last Post: tony-muscle
runninpony Round Seat Belt Warning Light Bezel NOT A T5 1 241 08-27-2018, 09:50 AM
Last Post: NOT A T5
  72 Mach1 fold down seat issue Engine302 6 440 08-19-2018, 03:40 PM
Last Post: Engine302
  Rebuild folded back seat Robsweden 8 456 05-29-2018, 01:23 AM
Last Post: Robsweden
  72 mach 1 rear seat swap 4kMach1 0 365 05-28-2018, 11:17 AM
Last Post: 4kMach1
  72’ Sportsroof seat replacement deford1 1 658 05-21-2018, 12:20 PM
Last Post: 4kMach1



Users browsing this thread: 1 Guest(s)