• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What is the restrictor air door vacuum motor
#1
I have been pitting together the AC heater vacuum controls and thought I had an extra wire. Turns out I am completely missing a whole vacuum motor. After searching i located a reman vacuum motor and learned that their a'l the same except for one. However the bolts run parallel with the motor so I think I'm missing the brackets on the heater box too. I'v circled the part I'm missing in the diagram.


[Image: 20180107_015607.jpg]
  Reply
#2
mine was bent there are a couple different versions out there, what year is your build? The one for mine looked just like what you posted and I got it from classic auto air I believe, cougar parts catalog also has one that I think is the same, its generally listed as a vacuum actuator.
  Reply
#3
It's on a 71. I found this on eBay. And in my opinion looms like the bolt holes would match up and has the curve for the motor.


[Image: Screenshot_20180107_060417.jpg]
  Reply
#4
like a lot of things on these, if it looks right, you think its right, it might fill the need, pull the trigger, and if it doesn't fit resell it and note that its not that. That is unless the "Don" sees this post and tells you it won't then I am just a humble lemming at the mountain of info that is Don and quiet myself to learn a new obscure mustang tidbit.
"All hail Don...........and view with trepidation that who is D.C." lmao Smile
  Reply
#5
(01-07-2018, 07:07 AM)Dreadknot Wrote: It's on a 71. I found this on eBay. And in my opinion looms like the bolt holes would match up and has the curve for the motor.


[Image: Screenshot_20180107_060417.jpg]
Do you need just the bracket or do you want the vac pod, rod and bracket ? I should have a could of A/C units for parts

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#6
There are two of these type vacuum motors. See the outside air motor in your diagram it is the same as the restrictor motor. This might help....

[Image: 20150102_120920.jpg]

[Image: 20150606_203429.jpg]

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
#7
Those pictures are just what I needed. Time to pull that trigger. I agree as well, if it doesn' fit I can just resell.
  Reply
#8
Not sure if this helps you out at all, but I snapped a couple of pictures before I removed the heater box...
[Image: hvac1.jpg]

[Image: hvac2.jpg]
  Reply
#9
is that a dirt wasps nest in your blower box??????????????
  Reply
#10
(01-30-2018, 01:49 AM)libram Wrote: is that a dirt wasps nest in your blower box??????????????

That is some type of dope they use at the factory to seal the hole around the temperature probe for the a/c cutoff switch. I used plumbers putty when I resealed my heater box.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear electric widow motor jimchil 4 235 06-29-2019, 04:49 PM
Last Post: Carolina_Mountain_Mustangs
  Removing front door glass without removing up stops Carolina_Mountain_Mustangs 3 301 06-21-2019, 08:44 AM
Last Post: Carolina_Mountain_Mustangs
  Air Cleaner flexible hose wjgrnp 16 6,876 05-29-2019, 11:34 AM
Last Post: Heardatbeat
  Passenger Door Lock Rod Retaining Clip vintageman 2 207 04-28-2019, 09:35 PM
Last Post: vintageman
  Is my Condenser & Air Filter/dryer OK?, how to test? andy72 3 334 04-02-2019, 09:16 PM
Last Post: andy72
  351C 2V California emissions with Ram Air andy72 4 386 03-26-2019, 10:16 AM
Last Post: andy72
  Vacuum Hose Sizes, what is correct size? List? andy72 4 362 03-22-2019, 02:39 PM
Last Post: Stanglover
  Exterior Door Handle Broken NewAgeMuscle 6 338 03-21-2019, 08:44 PM
Last Post: kcmash



Users browsing this thread: 1 Guest(s)