• 7 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What did you do to your car today?
(05-16-2020, 08:28 PM)Bentworker Wrote: Fixed the marker light recess on the repop quarter panel patches.  95% of the time was spent making the tool to do the job and 5% was actually doing the work.  Pretty happy with the results!


[Image: BDA037-C5-0-B25-4-B1-B-B475-5-F3-C376-D5-D0-F.jpg]

[Image: 4-B101-C5-F-6-BA7-41-F1-A597-2-BDC0-CB54-E73.jpg]

[Image: 45-AA8538-CFA7-446-C-8-F4-A-C0927-DBAA8-A2.jpg]

[Image: 69-C3-E45-E-891-F-4-E7-D-8232-A921-E8-DC4-E01.jpg]

[Image: BB29-DCC7-5339-4201-97-DA-E0-A28-C23-EAD7.jpg]
Nice work!

- Mike
  Reply
When cruising with some friends. One of them has a 2013 Mustang with headers, intake and other mods. He claims about 425 at the wheels. I was right there on his tail at full power. At about 80 mph is when he started pulling away ever so slowly.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
(05-17-2020, 10:00 AM)tony-muscle Wrote: When cruising with some friends. One of them has a 2013 Mustang with headers, intake and other mods. He claims about 425 at the wheels. I was right there on his tail at full power. At about 80 mph is when he started pulling away ever so slowly.

Sent from my SAMSUNG-SM-G930A using Tapatalk

For many car guys, the wish is usually the father of the thought when indicating the horsepower at the wheels. whistling

Cheers Frank
  Reply
(04-26-2020, 02:15 PM)Mister 4x4 Wrote:
(04-18-2020, 05:31 PM)Big Red Mach 1 Wrote: Waiting on my new timing light to arrive, so did one of my planned side projects. Added a rear camera-rear view mirror. It can split screen front and back, or just do back, or just do front. Can be tied into reverse lights also. Can record HD video to the 132GB Micro SD Card. Has GPS based vehicle speed. A security feature that starts recording if the car is rocked or bumped also. I really like it. Was about $100 on Amazon if I remember right. I can get the info if anyone is interested.

Off

[Image: 1.jpg]

On

[Image: 2.jpg]

Wire down from headliner

[Image: 3.jpg]

Rear location. Went out the same hole as the license plate light. No drilling.

[Image: 4.jpg]

Yes Please!  I'm tired of my Pyle Audio monitor - it's too big and clunky.  This looks a LOT nicer!


Oh, and took the Mustang out for spin and safety inspection yesterday.  Passed, of course, and got the attention of some retired Sheriff's Deputies at my favorite local car wash (went by to see how long they were open to get the wife's car done).  "Accidentally" did a little burn-out leaving the place - the owner later told me his friends he was talking to when I went by were retired Deputies and they thought it was pretty cool, actually.  Must've been OK, since nobody tracked me down to talk about it.  LOL!
Sorry for the delay. Here is the link. https://www.amazon.com/gp/product/B07WVX...UTF8&psc=1

And you will want this.
https://www.amazon.com/Hardwire-Dashcam-...PHSHCX63AN

And this.
https://www.amazon.com/gp/product/B06XWZ...UTF8&psc=1

Chris - Born in '73 - Drive a '73
Former Mechanic U.S. Army
1st Infantry Division - The Big Red One
BIG RED MACH 1
Learning a lesson (or three) on the Cleveland every day.
  Reply
(04-26-2020, 03:50 PM)machattack Wrote: I like that !!!!!  A lot.  Im doing this cause I cant see Sh*@  stuff :-)
Please share camera-rear view mirror order #s  Thank you for helpin out!


Sorry for the delay. Here is the link to the mirror. 

https://www.amazon.com/gp/product/B07WVX...UTF8&psc=1

You will also want this
https://www.amazon.com/Hardwire-Dashcam-...PHSHCX63AN

And this.
https://www.amazon.com/gp/product/B06XWZ...UTF8&psc=1

Chris - Born in '73 - Drive a '73
Former Mechanic U.S. Army
1st Infantry Division - The Big Red One
BIG RED MACH 1
Learning a lesson (or three) on the Cleveland every day.
  Reply
(05-17-2020, 10:00 AM)tony-muscle Wrote: When cruising with some friends. One of them has a 2013 Mustang with headers, intake and other mods. He claims about 425 at the wheels. I was right there on his tail at full power. At about 80 mph is when he started pulling away ever so slowly.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Tony why didn't you hit the GO   button    Tongue
[+] 1 user Likes OMS's post
  Reply
When I redid my suspension I didn't replace the sway bar bushings. I don't know if my sway bar is stock or not but I had to take measurements and order the proper universal urethane bushings and links. I also replaced the top bushing of the the shackle with urethane ones. I left the bottom one rubber.

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
Went on a much needed drive and “date” with the wife. Also, got this picture from a show last year. May be my favorite picture of my car.

[Image: c40ecc98c63388205a3d846d6ef7591d.jpg]


Sent from my iPhone using Tapatalk
  Reply
(Yesterday, 02:17 PM)jeremycfr Wrote: Went on a much needed drive and “date” with the wife. Also, got this picture from a show last year. May be my favorite picture of my car.

[Image: c40ecc98c63388205a3d846d6ef7591d.jpg]


Sent from my iPhone using Tapatalk
That is a sweet picture
  Reply
Took the mustang to the 4th annual mustang invasion today. Was in Oskaloosa IA. About 225 miles round trip. Car ran great. About 90 of us from this part of the state met up and cruised there together. Ended up with over 300 mustangs there. There were two other 73’s there. A Mach and a convertible, so with my coupe we had all three body styles represented for 73.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Today's dung 1sostatic 16 1,279 03-06-2020, 03:05 PM
Last Post: yancy55
  and for today's episode of "Guess what broke and left me stranded?" MustangNJ 6 1,079 09-21-2019, 12:13 PM
Last Post: MustangNJ
  found this for sale today MustangNJ 11 1,339 09-20-2019, 09:32 AM
Last Post: MustangNJ
  nothing broke today...and deep purple may have helped MustangNJ 10 977 08-05-2019, 11:16 AM
Last Post: MustangNJ
  1972 Mustang at Auction today Graham Man 5 895 07-26-2019, 02:17 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)