• 7 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What did you do to your car today?
#11
Regrettably, I haven't done anything to my Mach 1 since sometime in late August when I pulled the engine and tranny out. I've been getting my '80 CJ-7 ready for this weekend's car show, and once that's done, I'll be diving into the Rustang's front-end rehab while the engine's at the machine shop.

Eric

[Image: mach1sig2.gif]
  Reply
#12
Sunday I completed replacement on the front pass fender I had removed for battery apron installation. Found two of my drilled holes were about 1/4 inch off and now am considing pulling it again and enlarging the area to give me some wiggle room. I have a new antenna on order and will arrive on Friday. My plan is to remove the fender, install the antenna and route cable to under dash, realign holes, and try to get fender back adjusted to give correct fitment.

So all I really did was just sat and looked at it... Big Grin

1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


Member
Central Missouri Mustang & Ford Club
  Reply
#13
Today I drove it around town (it is a daily driver), partly just to burn some gas so I can change my sending unit in a few days. Then I spent a lot of time wondering when my rear bumper guards will ever get here. I've had the new bumper for a month, but I'm not going to put it on, then turn right around and pull it back off to put the guards on!

Joe
'72 Grandé, 351C, Autolite 2100, FMX, 2.75
  Reply
#14
Well, I got the Jeep ready for the car show on Saturday and won a "Best In Class - '80-'89 Modified" plaque for my trouble. That's 4 for 7 now... I guess my Jeep's not as much of a turd as I think it is.

I hope this picture is cool (since it's not a Mustang), but here's my Jeep from Saturday's car show. I recently (like 2 weekends ago) completed fabrication of the new front bumper and mounted the winch last Friday.

[Image: carshow2010.JPG]

Now that this year's car show is over (and the Jeep pretty much done except for the swapping in an AMC 360 V8 and TF727), I can dive into the Mach 1 and hopefully have an entry for next year's show in the "'70-'79 Modified" class. Big Grin

Anyway, that's what I've been doing - time to get serious about my '71!

Eric

[Image: mach1sig2.gif]
  Reply
#15
I'm starting to seriously look at the pain in the neck it's going to be to remove all the junk attached to the engine, and especially all the electrical wiring attached to it all. Marking everything and taking a bunch of pictures will be necessary so I can hook it all back up again. Don't want to honk the horn and have the convertible top fold down while it's raining. Big Grin

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#16
started to pick up old parts and tools laying under it from redoing brake system. rolling engine to back of garage so I can walk around the car

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#17
(10-19-2010, 06:25 PM)73vertproject Wrote: I'm starting to seriously look at the pain in the neck it's going to be to remove all the junk attached to the engine, and especially all the electrical wiring attached to it all. Marking everything and taking a bunch of pictures will be necessary so I can hook it all back up again. Don't want to honk the horn and have the convertible top fold down while it's raining. Big Grin

Doc
So..... don't honk the horn when it's raining? I don't know... seems like sound advice to me. Wink Big Grin

Eric

[Image: mach1sig2.gif]
  Reply
#18
Started kleaning all the engine parts I have for it in my parts washer.
  Reply
#19
Had a craving for sweets so enjoyed a few Donuts in the parking lot at work.All the guys at work said ssswwweeeetttt.Then I straitened her out and went homeBig Grin

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#20
installed new axle seals.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Anyone know this car Mjordan 0 163 11-25-2018, 11:18 PM
Last Post: Mjordan
  Members car wrecked? Stocktrader 6 437 11-03-2018, 12:36 AM
Last Post: mach71351c
Cone Need advice on moving the car coop's mustang projects 7 297 10-10-2018, 08:35 AM
Last Post: bkdunha
  Meet the donor car mach1000 20 2,978 10-07-2018, 10:36 PM
Last Post: FordRamAir.com
  Anybody Recognize this Car? Don C 3 531 09-29-2018, 11:27 AM
Last Post: Don C
  trying to buy car in Tennessee buyer thinks i am scammer Nige 13 779 09-13-2018, 11:34 AM
Last Post: Nige
  71-73 Car Covers rocketfoot 11 762 08-23-2018, 05:19 AM
Last Post: rocketfoot
  Mustang Memories Car Show Stanglover 9 640 08-20-2018, 07:00 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)