• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Weekly Fun Question - Test Your 71-73 Mustang Knowledge
#1
Some have indicated the questions have been "too easy" so this week's question is going to be a little bit different - - not as easy to google.

As some of you are probably aware, the mustangs built between 71 and 73, had two different axles available - - 28 spline and 31 spline. The question this week is:

What is the difference in length of the 28 spline axles from the 31 spline axles and what was the effective period of manufacturing for any changes?

I will see how long it takes to get the correct response for this oneSmile!


BT
  Reply
#2
if i understand correctly the difference in length was 2 inches I think. Not 100% positive. And pre 71 axles had a concave oval in the middle of the flange. And post 71 didn't.

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#3
No, good try but that is not the answer I am looking for on this question.

Any more responses?


BT
  Reply
#4
GOOGLE HAS FAILED ME HAHAHA
please specify what you mean by [ the effective period of manufacturing for any changes?} I am a little confused by the wording haha

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#5
This amounts to a hint:

There is a difference in length (of one or the other) of the 28 spline or 31 spline axles on the 71 - 73 mustang. This difference in length was reconciled after a certain date.

The question has to do with the difference in length between the two sets of axles and at what point was the "difference" reconciled.

I guess this one is a bit more difficult, huh?

BT
  Reply
#6
A little more? yeah I would say so hahaUndecided

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#7
That's a tuffy........
I'll instead take pre-mao-facist farming and tool implements for $500 please Alex. Big Grin
  Reply
#8
(08-03-2010, 06:45 PM)MachSport72 Wrote: That's a tuffy........
I'll instead take pre-mao-facist farming and tool implements for $500 please Alex. Big Grin


hahaha

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#9
OK I"ll say 12-15-72

[Image: 20r9ylt.jpg]
  Reply
#10
...and Nance, you are correct on the date of the change!

So what is the difference in length between the 28 and 31 spline axles??


BT
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Toploader question Jeff73Mach1 16 350 10-11-2018, 12:24 PM
Last Post: Jeff73Mach1
  1973 Mustang Coupe Exhaust System mustang7173 2 199 10-01-2018, 05:40 AM
Last Post: NOT A T5
  Motor mount vs Frame mount question crzyfun 8 361 09-15-2018, 12:31 PM
Last Post: Don C
  Compression test advice needed crzyfun 14 525 09-06-2018, 09:13 PM
Last Post: Don C
Wrench Asa Jay's next engine build - 1971 Mach I Mustang, Open Road Racing asajay 8 464 09-04-2018, 08:11 AM
Last Post: Carolina_Mountain_Mustangs
  DIY engine test setup tony-muscle 7 470 09-01-2018, 05:57 AM
Last Post: Pegleg
  1971 1973 mustang muffler top hat mounts mustang7173 17 572 08-17-2018, 09:21 PM
Last Post: mustang7173
  Last ram air question i promise eventhorizon 9 1,030 07-21-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)