• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Weekly Fun Question for 12-11-2010 - Test Your 71-73 Mustang Knowledge
#1
Good Day All!

As we try to do every Saturday, below is the Weekly Fun Question where you are given the opportunity to earn "bragging rights" and a nice Icon if you are the first to provide the correct response to the question.

Responses should be PM'd to Rocketfoot and me. The person who is the first to provide the correct response will be identified in a post to this thread on Monday at approximately 7:00 PM (CST).

The question this week is:

In the drag-pack axle found on the 1971 429 Mustang, what is the difference (other than ratio) between the 3:91 gears and the 4:11 Gears?

Good Luck!

BT

Do the RIGHT thing.
  Reply
#2
did it have 31 spline axles, and or a detroit locker in it with beafier brakes?
  Reply
#3
That is not the response I am looking for to this question.

BTW, the responses should be sent by PM to ROCKETFOOT and me. We do this to keep it fair for everyone. Sometimes, a person knows part of the answer and by seeing the incorrect response, he/she is able to "guess" the correct response. Plus, sending the response via PM encourage more people to "play."

Thanks.

BT

Do the RIGHT thing.
  Reply
#4
Good Day All!

As you may recall, the question for this week is:

In the drag-pack axle found on the 1971 429 Mustang, what is the difference (other than ratio) between the 3:91 gears and the 4:11 gears?


We had four (4) members to respond correctly to the question but the first to respond was 73MACH1 who responded by stating that the difference had to do with the 3:91 gears having a "Traction Loc" while the 4:11 gears had a "Detroit Locker."

"Honorable Mention" goes to TNFASTBK, HEMIKILLER and 72HCODE who also responded (in that order) with the correct answer, albeit not as quickly as 73MACH1.

GREAT job Jay!!

BT

Do the RIGHT thing.
  Reply
#5
Congratulations, 73MACH1! Your award has been granted!

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#6
goodjob

73Mach1 is off and running. Congrats again.
  Reply
#7
Thanks. It felt good to know one for once.

Jay
73 mach1
  Reply
#8
i have no chance, by the time i log in you are on the next contest hahahaha
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Toploader question Jeff73Mach1 16 326 10-11-2018, 12:24 PM
Last Post: Jeff73Mach1
  1973 Mustang Coupe Exhaust System mustang7173 2 187 10-01-2018, 05:40 AM
Last Post: NOT A T5
  Motor mount vs Frame mount question crzyfun 8 351 09-15-2018, 12:31 PM
Last Post: Don C
  Compression test advice needed crzyfun 14 521 09-06-2018, 09:13 PM
Last Post: Don C
Wrench Asa Jay's next engine build - 1971 Mach I Mustang, Open Road Racing asajay 8 459 09-04-2018, 08:11 AM
Last Post: Carolina_Mountain_Mustangs
  DIY engine test setup tony-muscle 7 437 09-01-2018, 05:57 AM
Last Post: Pegleg
  1971 1973 mustang muffler top hat mounts mustang7173 17 563 08-17-2018, 09:21 PM
Last Post: mustang7173
  Last ram air question i promise eventhorizon 9 1,024 07-21-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)