• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wanted motorcraft 2100 2 barrel
#1
Hi All

i am having trouble with my motorcraft 2100 carb 2 barrel on 73 mach 1 351 cleveland

would anyone have a new carb you would sale.

Nige
  Reply
#2
(11-03-2018, 03:11 PM)Nige Wrote: Hi All

i am having trouble with my motorcraft 2100 carb 2 barrel on 73 mach 1 351 cleveland

would anyone have a new carb you would sale.

Nige

Pretty sure I have a Holley two barrel that needs a rebuild, if you want to go that route. I can get numbers later.
  Reply
#3
Have you tried to rebuild it? Do you know what the problem with it is?



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
(11-05-2018, 02:34 PM)Don C Wrote: Have you tried to rebuild it? Do you know what the problem with it is?

Hi Don C 

I used one of those carb rebuild kits runs great 40 mph and over , as soon as i drive at 30 mph in drive starts chugging unless you drive in 2nd automatic ,
as soon as you have to slow down or stop starts to get lumpy and cut out .

Have taken carb part twice to check .

Thanks Nige
  Reply
#5
It may not be the carburetor. It could be a vacuum leak or an ignition problem.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#6
i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.
  Reply
#7
(11-17-2018, 03:40 AM)stormy69 Wrote: i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige
  Reply
#8
(11-18-2018, 01:02 PM)Nige Wrote:
(11-17-2018, 03:40 AM)stormy69 Wrote: i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige
I have an extra one you can have for shipping cost,It may fine to use as is as it ran fine a few months ago.
  Reply
#9
(11-19-2018, 06:19 AM)3514boltstang Wrote:
(11-18-2018, 01:02 PM)Nige Wrote:
(11-17-2018, 03:40 AM)stormy69 Wrote: i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige
I have an extra one you can have for shipping cost,It may fine to use as is as it ran fine a few months ago.
Hi That would be very good of you . Nige
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Wanted c6 alloy trans pan Nige 0 107 06-15-2019, 02:05 PM
Last Post: Nige
  Wanted! Fastback decklid torsion springs (w spoiler) Spechti 8 1,364 06-11-2019, 11:43 PM
Last Post: knn
  Wanted steering wheel Nige 6 274 04-04-2019, 03:41 PM
Last Post: Nige
  69/70 Mustang vert wanted. Stanglover 0 219 12-21-2018, 03:19 PM
Last Post: Stanglover
  WANTED: donor shell MissionGarage 4 461 10-28-2018, 12:15 PM
Last Post: Motorcity Mustang
  73 wanted Front hood molding batwrangler 5 660 10-16-2018, 05:18 PM
Last Post: Motorcity Mustang
  Wanted convertible hood switch Nige 6 424 10-06-2018, 06:58 AM
Last Post: 7173Vert
  Wanted: Steering wheel and marker light sockets RadRacer203 15 955 09-16-2018, 06:04 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)