• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Vacuum Booster Seal disintegrated
After removing the pedal support assembly and the brake pedal to expose the firewall, an inner plastic seal between the firewall and the vacuum booster was found to be disintegrated. See the photos below. Before I have to remove the vacuum booster and enter that mess, can someone tell me what this plastic component is and how to replace it?  I don't want to remove the vacuum booster if I don't need to.  I also found it was somewhat glued to the back of the rubber boot which covers the rod.

[Image: IMG-20190517-144307653.jpg][Image: IMG-20190517-144242199.jpg]


What you're seeing is only a portion of the plastic "gasket", the rest is on the outside between the booster and outside of the firewall.

This has been discussed before

“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  Brake Booster Vacuum Source jowens1126 8 278 10-10-2019, 06:14 AM
Last Post: NOT A T5
  Brake Booster Gasket jowens1126 0 112 10-09-2019, 09:39 AM
Last Post: jowens1126
  Brake booster seal 73429mach 13 694 04-09-2019, 07:33 AM
Last Post: Omie01
  Dust/Dirt seal on Pitman Arm Post Stanglover 16 2,163 01-20-2019, 08:18 PM
Last Post: Stanglover
runninpony PIT MAN ARM RUBBER SEAL NOT A T5 19 1,582 01-17-2019, 11:52 AM
Last Post: Stanglover
  Replacement PItman Arm Seal BigPinoyHunk 3 1,090 01-15-2019, 07:41 AM
Last Post: GeoBW
  Another booster question Omie01 6 555 01-04-2019, 08:16 AM
Last Post: Omie01
  Brake Booster Rebuild Omie01 6 542 12-28-2018, 08:15 AM
Last Post: Omie01

Users browsing this thread: 1 Guest(s)