• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn Signal Switch Advice Needed
#11
Pretty common problem with older cars. They can get corroded on the inside, too, look fine but not work right. Sometimes heating the end with a soldering iron enough to melt the solder in the end caps will fix them.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
[+] 1 user Likes Don C's post
  Reply
#12
I had a similar issue with the horn when I went to get the car inspected.  Got it home, the horn still didn't work, so I took everything apart and tested.  Of course, the last thing I tested was the fuse.  The test light lit up on both sides when I checked it, but I pulled the fuse anyway and found a good fuse, with a little bit of corrosion on the ends where it rested in the panel.  So, cleaned up the clips and installed a new fuse (I have a big bag of old glass fuses) and all was good again.  I cleaned up the 'old' fuse and tossed it back in the bag.

Eric

[Image: mach1sig2.gif]
[+] 1 user Likes Mister 4x4's post
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  TURN SIGNAL AND BREAK LIGHT ISSUE 72mustang67gto 6 191 Yesterday, 03:15 PM
Last Post: 72mustang67gto
  Turn signal problems jpaz 15 401 06-03-2019, 08:18 AM
Last Post: turtle5353
  Another strange turn signal issue 73pony 15 1,279 04-10-2019, 04:16 PM
Last Post: Fabrice
  Damn turn signal ... brodertr 8 463 01-14-2019, 10:51 PM
Last Post: brodertr
  Brake lights & Turn Signals not working rjpohl 4 434 12-31-2018, 01:24 PM
Last Post: Don C
  ignition switch Robert sneed 1 498 07-19-2018, 09:02 PM
Last Post: midlife
  Turn signal switch Robert sneed 5 617 07-10-2018, 11:33 AM
Last Post: midlife
  Headlight switch bracket Danno 1 408 04-22-2018, 04:03 PM
Last Post: Danno



Users browsing this thread: 1 Guest(s)