• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trying to MAKE IT WORK!!
#1
Hi guys!! i was checking on ebay here and a pic reminded me that i still have the wiring from the Front Seatbelt Retractors laying in a box...

I "stole" this pic from the ebay seller just to show you guys what i´m talking about...


.jpg   cinturón de seguridad.jpg (Size: 189.57 KB / Downloads: 96)

As you can see... there´s a small harness of wires that come off the retractors... I have them but not connected neither to the retractors nor to the car...

What i must know from the start is where to connect them in the main wiring, as i dont remember leaving obvious wiring plugs unconected under the dash...

Also it would be nice to know what this things do! Tongue are they the wirings that goes to the buzzer?? or maybe to the "fasten seatbelt" red sign on the passenger side of the dash?

Well... just for you to know, i have a lot of things that are not working, similar than this... The dome light cable is loose at the dash because i didn´t know where to put it, as are the door plastic pins that turn on and off the dome light... I have no horn and the radio is not connected because someone kill the plugs in the main wiring... so... I HAVE A LOT TO FIND OUT! Smile

Any thoughts??? Smile Thanks!!



Damián Cool

[Image: 120x45bk1ani.gif]
Vote For 7173Mustangs.Com Every Day!
  Reply
#2
Damian, one of the members here sent me a wiring diagram. PM me your e-mail and I'll forward it to you.

Steve



[Image: 25yvyp3.jpg]
  Reply
#3
Damian, those wires are for the seat belt warning light and buzzer. Sounds like you need to get a copy of the drawings for the wiring for your 72. I beleive you can get those from any of the suppliers. Do you have a set of shop manuals?

[Image: 16kuyc0.jpg]
  Reply
#4
FastE;27890 Wrote:Damian, those wires are for the seat belt warning light and buzzer. Sounds like you need to get a copy of the drawings for the wiring for your 72. I beleive you can get those from any of the suppliers. Do you have a set of shop manuals?

How are you??? you know.. i have the shop manuals but i didnt find that part... Steve on the other hand, sent me a very complete wiring diagram that i´m gonna check this weekend to see if i have everything in order there...

So, just have to get some hours to spend scratching my head this weekend Tongue

Thanks for posting!!



Damián Cool

[Image: 120x45bk1ani.gif]
Vote For 7173Mustangs.Com Every Day!
  Reply
#5
On my sons 72 the wires run under the drivers side under the carpet.I will look this weekend.

[Image: 20r9ylt.jpg]
  Reply
#6
is there a timer for the warning lights and buzzer, or does it remain on until the belts are buckled?
  Reply
#7
72HCODE;27907 Wrote:is there a timer for the warning lights and buzzer, or does it remain on until the belts are buckled?

I dont know.. never worked in my car... Actually my car came in boxes and i put everything together as i could... i was trying to make it drivable at that time, thinking some day i´ll learn the other things that i couldn´t figure out right then..

I think if the harness goes into the seatbelt, then there´s no timmer and yes, it should stop when the seatbelt is plugged (not so comfortable actually)

But lets hear what the other guys have to say Smile



Damián Cool

[Image: 120x45bk1ani.gif]
Vote For 7173Mustangs.Com Every Day!
  Reply
#8
On my 73 the buzzer stops and the light goes off when the seat belt is clicked together.
  Reply
#9
OLE PONY;27968 Wrote:On my 73 the buzzer stops and the light goes off when the seat belt is clicked together.

Same on my '72. No timer that I know of.

Steve



[Image: 25yvyp3.jpg]
  Reply
#10
buzzer doesnt work in my 73 either..but it did on are old blue mach 1....it seemed too have a sensor in the seat too...and not just when you buckled it...so it could tell if anyone was sitting in the passanger seat...or the thing would be going off all the time with out it..lol...sooooo i think there is a sensor under your seat too and maybe a timer.....cause if you lifted you butt off the passanger seat..it would stop..and if you waited like that with your arse off the seat as you was pulling off..it would go off and never come back on till you restarted...back in the day you was pissed off to put on your seat belt..lol...i know my seat on my red mach has plugs under it going to the bottom of the seat....i think its the weight sensor..must ground out when you sit in it and make a circuit too the buzzer too.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Windshield wipers won't go down and windshield washer won't work kevken1959 16 858 12-26-2017, 12:40 PM
Last Post: Stanglover
bulb Power windows stopped working, Gauge cluster lights don't work Neubonik 3 495 12-16-2016, 12:05 PM
Last Post: Carolina_Mountain_Mustangs
  Power windows don't work mpbsr 10 1,083 05-01-2015, 06:07 PM
Last Post: Carolina_Mountain_Mustangs
  Voltmeter does not work... forspeed 13 2,977 02-09-2011, 02:32 PM
Last Post: forspeed



Users browsing this thread: 1 Guest(s)