• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
True street 550hp clevo
#1
For those interested in building a true street 408 Cleveland with hydraulic roller cam and dual plane, it could have made a bit more horsepower but Look at the torque figures nice engine
std block
408ci
11.6 comp
240@050 hyd roller cam
CHI 3v 208cc heads
CH dual plane
750 quck fuel
ICE ignition
1 3/4 4into1 pipes
bp98 fuel
550hp @6000
538ftlb tq @4450
   
   


Attached Files Thumbnail(s)
   

He has all the vices I admire and none of the virtues I despise
  Reply
#2
Luke;290390 Wrote:For those interested in building a true street 408 Cleveland with hydraulic roller cam and dual plane, it could have made a bit more horsepower but Look at the torque figures nice engine
std block
408ci
11.6 comp
240@050 hyd roller cam
CHI 3v 208cc heads
CH dual plane
750 quck fuel
ICE ignition
1 3/4 4into1 pipes
bp98 fuel
550hp @6000
538ftlb tq @4450

I was thinking about doing the same thing to mine but haven't figured out all the parts I need yet, still a long way away from playing with the engine. What i'm curious about tho is.... how much $$?
  Reply
#3
Very nice build, well done. Chuck
  Reply
#4
Wow that is one mean engine!! ️😎

Sendt fra min F8331 med Tapatalk

So I'm a proud owner of one Mach 1 73! Regards Lars DK73whistling
  Reply
#5
Impressive numbers. Am I reading right that is it 98 octane? Around here the best pump gas is 91.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#6
Can we get more specs on the cam?

1971 M-code Mach 1

        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
#7
will e;290455 Wrote:Impressive numbers. Am I reading right that is it 98 octane? Around here the best pump gas is 91.

Yes we have access too 98octane pump gas. Your fuel seems to have a faster burn rate than ours so it's good in that regard.

He has all the vices I admire and none of the virtues I despise
  Reply
#8
tony-muscle;290482 Wrote:Can we get more specs on the cam?

1971 M-code Mach 1
109 lobe Sep custom hydraulic roller. It wouldn't have huge lift. 3Vs are a very good head lots of Port velocity. They can be made to flow 294@400 330@500

He has all the vices I admire and none of the virtues I despise
  Reply
#9
c9zx;290433 Wrote:Very nice build, well done. Chuck
Not mine unfortunately Chuck. I have gone back to the darkside SBC's.
Will be building a hydraulic roller 383 sbc that will be a real street 570-620hp deal. I could start a thread if people are interested

He has all the vices I admire and none of the virtues I despise
  Reply
#10
Billyillyilly;290427 Wrote:
Luke;290390 Wrote:For those interested in building a true street 408 Cleveland with hydraulic roller cam and dual plane, it could have made a bit more horsepower but Look at the torque figures nice engine
std block
408ci
11.6 comp
240@050 hyd roller cam
CHI 3v 208cc heads
CH dual plane
750 quck fuel
ICE ignition
1 3/4 4into1 pipes
bp98 fuel
550hp @6000
538ftlb tq @4450

I was thinking about doing the same thing to mine but haven't figured out all the parts I need yet, still a long way away from playing with the engine. What i'm curious about tho is.... how much $$?
Being in the state's it would be a lot cheaper than here. Use stock 4Vs that would keep cost down and still hit these numbers

He has all the vices I admire and none of the virtues I despise
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Looking for a healthy street cam (4v-351c) cazsper 12 2,243 04-16-2017, 11:35 PM
Last Post: Luke
  TCI street fighter AOD mbrew2 2 840 11-29-2016, 01:57 PM
Last Post: Don65Stang
  Detroit locker for the street? cazsper 21 2,820 07-11-2014, 01:05 AM
Last Post: cazsper
  T-56 Street rod anyone? MustangMyWay 4 881 05-01-2014, 05:08 PM
Last Post: cazsper
  Quick proven clevo recipe Luke 17 2,014 04-12-2014, 08:32 PM
Last Post: downwardspiral
  True Trac Luke 13 1,885 01-24-2014, 08:52 PM
Last Post: cazsper
  street car: cams for given engine displacement? what do you think? cazsper 6 943 11-17-2013, 12:43 PM
Last Post: Don C
  Gears for the street? cazsper 22 2,412 06-26-2013, 04:47 PM
Last Post: cazsper



Users browsing this thread: 1 Guest(s)