• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transmission Neutral Safety Switch
#1
1973 Mach1 C6 Transmission. If your car starts only in park and neutral as it should. Does that mean that the reverse light circuit is good? I can not get my reverse lights to work. I have done the stick the pin to 31/64". That checks out good. I can hot wire the proper pins on the harness and the reverse lights work fine. I moved the neutral safety switch around while in reverse with no luck. Do I need to replace my neutral safety switch? It's the same one I have had on the car since I bought back in 1982. Thank you.
  Reply
#2
Yes, it sounds like you need a new NSS.

Please go to the Introduction section under the Forum tab and introduce yourself and your car. We like pictures.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
With care it sometimes can be repaired. https://www.7173mustangs.com/thread-neut...ral+safety
Chuck
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Replacing ignition switch DeereFanatic 8 553 08-17-2019, 05:52 AM
Last Post: Aus73Mach1
  Overhaul of a Ford FMX Transmission machmeter1 34 37,313 07-24-2019, 04:26 PM
Last Post: wedo
  Neutral safety switch Robnbama 19 509 07-07-2019, 09:13 PM
Last Post: Don C
  Scott Drake turn signal switch bluto72 4 514 02-15-2019, 07:30 PM
Last Post: bluto72
  FMX transmission shifter seal replacement how to mach1000 15 6,900 01-20-2019, 04:08 PM
Last Post: Rbouwma
  vacumn line and thermal switch naa10104 3 637 07-09-2018, 07:04 PM
Last Post: naa10104
  Neutral safety switch location jowens1126 9 827 07-08-2018, 11:56 AM
Last Post: jowens1126
  Neutral Safety Switch mudbilly 18 1,607 07-03-2018, 05:08 PM
Last Post: mudbilly



Users browsing this thread: 1 Guest(s)