• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Timing chain
#11
(11-16-2018, 12:32 PM)barnett468 Wrote:
(11-16-2018, 11:50 AM)jpaz Wrote:
(11-16-2018, 11:38 AM)barnett468 Wrote: There is only one word (well maybe two words) in timing chains, and that is rollmaster. i use the ones with the iwis chains.
Is rollmaster a brand name?

yes.

you can ask them if they make one with an iwis chain without the torrington bearing if you don't want to tun the bearing.


http://www.romacusa.com/downloads/RM_Tim...ations.pdf
Ok, thanks for the info and link barnett468

run_horse Run Horse Run!
John 72 Q Code
  Reply
#12
Romac makes good stuff. I've had good luck with Cloyes, but if you want a really nice timing set...

https://www.amazon.com/Rollmaster-CS3091...B00TO61NLG

If it hit the water pump, also have them check your pulleys and damper for damage.


  Reply
#13
(11-16-2018, 02:02 PM)Hemikiller Wrote: Romac makes good stuff. I've had good luck with Cloyes, but if you want a really nice timing set...

https://www.amazon.com/Rollmaster-CS3091...B00TO61NLG

If it hit the water pump, also have them check your pulleys and damper for damage.
Thanks, will do

run_horse Run Horse Run!
John 72 Q Code
  Reply
#14
runninpony 
I don't think they can flush out rust from a system, they tried that on mine and oh... not so much!

71-73 Mustangs never die, they just go faster!
  Reply
#15
So after thinking about it for awhile I’ve decided that this engine needs to be gone thru. Considering how stretched out the timing chain is and with all the rust that is in the block, I don’t think I can trust it. I’m not really sure now what the guy I bought the car from said is true. So I am getting it all torn down, cleaned, magna fluxed, measured up and see what’s going on. Then I can go from there and not have to worry about some cheap china crap failing.

run_horse Run Horse Run!
John 72 Q Code
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  429 timing settings. Info and help please. Stanglover 12 497 04-25-2019, 08:30 AM
Last Post: Stanglover
  Which way to advance the timing? scgamecock 4 338 03-10-2019, 08:32 AM
Last Post: delawarebill
  Initial Timing 351C turtle5353 10 732 02-28-2019, 10:08 AM
Last Post: Don C
Wrench Timing light advance measurement doesn't stop tony-muscle 44 1,729 10-12-2018, 06:27 PM
Last Post: Stanglover
  351C M-Code engine Timing issue! Meyer 25 2,645 06-17-2018, 08:41 AM
Last Post: Stanglover
  Timing Pointer Location Jon71 5 849 05-28-2018, 07:03 AM
Last Post: delawarebill
  Timing cover plate seal against oilpan missing Robsweden 4 870 05-08-2018, 01:14 AM
Last Post: Robsweden
  351C timing cover erikroy57 5 1,442 02-14-2018, 03:53 PM
Last Post: MeZapU



Users browsing this thread: 1 Guest(s)