• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tim's 1973 Mach 1 rebuild thread
That's one impressive progress. Awesome (lots of) work!

I'll be studying your doors repair work in details very soon, as I need do the same/similar.
I might PM/spam you with some questions if you don't mind.

[my work is better than that from his body guys in his shop! ]
Obviously there is love involved here Smile

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
(12-18-2018, 08:24 AM)Fabrice Wrote: That's one impressive progress. Awesome (lots of) work!

I'll be studying your doors repair work in details very soon, as I need do the same/similar.
I might PM/spam you with some questions if you don't mind.

[my work is better than that from his body guys in his shop! ]
Obviously there is love involved here Smile

Thank you very much, very appreciated thumb 

I followed your thread, too, here and there. You deserved your name "Chef-Cooking Fabrice" very well. Impressive work you do in such a small place. I know how it is with our hoods - did mine too from both sides. Some heavy ping-pong table... Tongue

Will answer your questions anytime. I know my doors now Big Grin

Yes, that must be love - with less than that you cannot do such things in your freetime  whistling

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
[Some heavy ping-pong table... Tongue ]
Yes tho, If I ever catch someone playing ping-pong on it, I might get a little bit mad Smile)

[Will answer your questions anytime. I know my doors now Big Grin]
thx, let's start by a small one. I see you have used some kind of rotisserie to hold/work on them.
I've changed the pins of the hinges on my 73 a few months back and got an idea of the weight but they were with glass, motor, handle etc..
How heavy are they roughly when empty? Should I really think of making/buying such support or is the weight manageable like the deck lid (expecting bits more)?

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
Nice job! Will be a real nice rid when done.

- Mike
  Reply
(12-18-2018, 09:15 AM)Fabrice Wrote: [Some heavy ping-pong table... Tongue  ]
Yes tho, If I ever catch someone playing ping-pong on it, I might get a little bit mad Smile)

[Will answer your questions anytime. I know my doors now Big Grin]
thx, let's start by a small one. I see you have used some kind of rotisserie to hold/work on them.
I've changed the pins of the hinges on my 73 a few months back and got an idea of the weight but they were with glass, motor, handle etc..
How heavy are they roughly when empty? Should I really think of making/buying such support or is the weight manageable like the deck lid (expecting bits more)?

They are not as heavy as the hood but also big and heavy enough. Way more than the light deck lid! For the rough work on them the rotisserie stands are not necessary. But when it gets to the work like grinding, sanding, tinning and bondoing it is very practical to have it in a stand like this. Even for painting, nothing better. So you could do both sides in one paint job! I won't miss one if I would do that anymore...

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
(12-19-2018, 12:34 AM)mach71351c Wrote: Nice job! Will be a real nice rid when done.

Thank you Mike!

I appreciate your words a lot! 

Looking for your resto thread regularly... thumb

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
In addition to the former posted pictures of the painted car with primer and filler I show you some of the trunk area Wink 



[Image: dsc_2054q6eja.jpg][Image: dsc_2052lie2g.jpg]


[Image: dsc_2051use0y.jpg][Image: dsc_2057pcc6f.jpg]


[Image: dsc_2056mle2t.jpg]

[Image: dsc_20580acen.jpg]


[Image: dsc_2053ajfcd.jpg]

[Image: dsc_2050zfduv.jpg]




After that I primed the door latches and the inner wheel well lips in the back.


[Image: dsc_206792dfc.jpg]


[Image: dsc_2062o3in1.jpg]

Now on holidays for some serious work on the house at home Wink


In the new year I will continue on the finish-sanding...

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  71 Euro Shelby (Mach 1) Clone whelessray 3 111 04-16-2019, 04:17 AM
Last Post: NOT A T5
  Have started the long job of cleaning the 73 Mach 1 Carolina_Mountain_Mustangs 120 4,760 04-15-2019, 08:52 PM
Last Post: mjseakan
  Video of 73 Mach 1 going into MOM Carolina_Mountain_Mustangs 13 315 04-15-2019, 09:55 AM
Last Post: Carolina_Mountain_Mustangs
  Yellow Mach 1 is back again! turtle5353 191 4,617 04-15-2019, 06:11 AM
Last Post: turtle5353
  Summer deadline - 72 Mach 1 Build thread baz70 57 1,678 04-13-2019, 01:11 PM
Last Post: baz70
Wrench NZ Vert Rebuild Ballaratcastle 28 699 03-13-2019, 03:00 AM
Last Post: Ballaratcastle
  MuscleTang mod project thread (1971 M-Mach 1) tony-muscle 256 27,040 03-08-2019, 08:13 AM
Last Post: tony-muscle
  Justin's 1973 Mach 1 "Q" Code wrobinson 45 4,980 02-22-2019, 03:12 PM
Last Post: wrobinson



Users browsing this thread: 1 Guest(s)