• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
tachometer install
#1
tach 
i have a 73 mach1 that i bought an after market tach for.one of the wires is supposed to go to the speedometer.for newer cars i guess.is there some type of adapter for this? will the tach work without the wire connected? thanks.
  Reply
#2
I'll need more information about the tach, brand and model. I've never come across this before, don't know why it would need speedometer input.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
its a qiilu 3.75" 12 volt, 11000 rpm, blue led w/shift light. thats all i know about it. 5 wires come out of the back .....red-battery, black-ground. orange-ignition, white-illumination, green-engine speed input. thanks
  Reply
#4
(10-04-2018, 02:29 PM)Don C Wrote: I'll need more information about the tach, brand and model. I've never come across this before, don't know why it would need speedometer input.

i was just thinking....green goes to coil???????????
  Reply
#5
Yes, likely the negative coil terminal.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#6
Looks like a decent tach, I tried to find the install instructions online but could not find them. I would not want to give any advice without reading them.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#7
(10-04-2018, 03:36 PM)73pony Wrote: Looks like a decent tach, I tried to find the install instructions online but could not find them. I would not want to give any advice without reading them.

i wish the instructions would be more clear.thanks for the help guys!!
  Reply
#8
Here is my guess based on reading the features......

5 wires come out of the back

Red - Constant Battery power (to save settings)
Black - Ground
White - Illumination (tie to dash lights so it lights up when lights are on)
Orange - Switched 12v (comes on and provides power when ignition is on)
Green - coil or tach input, depending on what type of ignition you are running.

Hope this helps.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#9
(10-04-2018, 04:37 PM)73pony Wrote: Here is my guess based on reading the features......

5 wires come out of the back

Red - Constant Battery power (to save settings)
Black - Ground
White - Illumination (tie to dash lights so it lights up when lights are on)
Orange - Switched 12v (comes on and provides power when ignition is on)
Green - coil or tach input, depending on what type of ignition you are running.

Hope this helps.
it helps me a lot. again,thanks for the help.
  Reply
#10
I also assume there is some sort of set up function or switch on back to select for 8 cyl as well. This just gets missed a lot.,

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Kickdown Rod Install on Edelbrock 1406 and FMX Rumblefish 3 256 05-10-2019, 02:45 PM
Last Post: Fabrice
  Stabilizer bar bushing install slowpoke17 1 195 04-21-2019, 09:12 AM
Last Post: SteveO_71
  Tachometer for 73 Mach 1 broken ToBe 8 407 01-30-2019, 02:31 AM
Last Post: ToBe
  Shaker install Davehoser 7 543 01-20-2019, 04:59 AM
Last Post: luxstang
runninpony Wiper Motor Install blkulis 3 540 07-25-2018, 04:13 PM
Last Post: Pegleg
  Factory A/C install in a non A/C car who has done it NG8264723 11 2,077 07-11-2017, 11:27 AM
Last Post: Jeff73Mach1
  Install engine with headers on?? Casperfast 4 911 09-04-2016, 07:53 PM
Last Post: Casperfast
  Roller rockers install chefabg123321 7 1,693 01-02-2016, 09:59 PM
Last Post: 4Vforever



Users browsing this thread: 1 Guest(s)