• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Steering Column alignment mark
#1
Trying to do a lock rod adjustment for the transmission, reading the 72 shop manual, it says to align the "steering column alignment mark" with the hole in the steering column cover and insert a #15 drill, then torque the retaining bolt....Does this sound familiar to anyone? and what does the alignment mark look like? is it a hole or a ridge...I cant see anything in there...Huh

Any help appreciated
T2

72 Coupe 302 w/FMX all stock
  Reply
#2
That would be a 15/64" drill bit or use a 1/4" to stick thru the alignment holes (neutral)

Loosen the retaining nut on the lock rod, then put the drill bit in the alignment hole, then tighten the lock nut.
  Reply
#3
RacerX;154768 Wrote:That would be a 15/64" drill bit or use a 1/4" to stick thru the alignment holes (neutral)

Loosen the retaining nut on the lock rod, then put the drill bit in the alignment hole, then tighten the lock nut.

Thanks RacerX For the info...I think I got it now...the destructions are not very clear in the shop manual

T2
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Alignment of bellhousing to engine tony-muscle 0 231 09-12-2018, 01:50 PM
Last Post: tony-muscle
Wrench Help! Not sure how to mount the power steering pump 351W Ballaratcastle 12 638 08-15-2018, 09:17 AM
Last Post: Hemikiller
  Correct 351C Power Steering Hoses? street rod mach 1 7 414 08-12-2018, 08:26 AM
Last Post: NOT A T5
  Power Steering Pump Replace 1972 MACH, stock? andy72 9 726 05-17-2018, 12:05 PM
Last Post: Fabrice
  Can’t ID This Alternator & Steering Pump 4mm 7 1,320 02-25-2018, 05:19 PM
Last Post: 4mm
  Power steering totally gone Fabrice 11 1,205 10-15-2017, 02:17 PM
Last Post: Fabrice
  power steering pump pully delawarebill 5 875 05-22-2017, 11:19 AM
Last Post: delawarebill
  Power steering system blkulis 3 1,126 05-20-2017, 12:50 AM
Last Post: Spike Morelli



Users browsing this thread: 1 Guest(s)