• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
spray touch up paint
#1
Are spray touch up cans still availible from duplicolor or any other brand. I would like to clean up inside doors and under the hood.
[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
I had a local NAPA paint store mix some up and put it in rattle cans. It cost me 10.00 per can and he even let me have the little bit that was left in the mixing can. I have done some touch-up and repainted my rear valance and 1/4 end caps. I am pleased with the results.

Check with some local automotive paint stores.
Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#3
X2 on NAPA...I need to head down there and get a rattle can for the Mach1.
[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
1972 Coupe - 306cid/C4 Gold Glow (in restoration phase)
  Reply
#4
most napa stores actually don't mix paint, the closest one to me that does is it 90 minutes away! i had to repaint a fender on my wife's 06 Impala and just got the paint from http://www.touchuppaintonline.com
  Reply
#5
i actually used http://paintscratch.com/ years ago for a bunch of cars i had everything i got from them matched very well.

I actually had them mix factory yellow for my mustang, that was when i discovered my car was a respray in a custom yellow and not factory.

however a good paint store near you should be able to mix up a spray can for you and blend custom colors.
[Image: sig.jpg]
  Reply
#6
X2 - I had a custom yellow mixed as the paint on my car is old and faded.
Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SEM paint and other interior questions Jeff73Mach1 3 95 02-14-2017, 01:50 AM
Last Post: Austin Vert
  SEM interior paint Pegleg 7 315 02-05-2017, 08:51 AM
Last Post: John J
  Black hood and stripe paint KT-69 4 378 11-08-2016, 09:10 AM
Last Post: Stanglover
  Square type hood paint. Template available? NG8264723 4 349 07-13-2016, 09:17 PM
Last Post: secluff
  2015 Deep impact blue paint? scgamecock 3 388 06-13-2016, 08:05 AM
Last Post: Bill73Ragtop
check Austin Vert On Paint Protection. Austin Vert 13 809 03-26-2016, 08:16 AM
Last Post: nickstewartroc
  Tutone Hood paint question classicsguy 32 5,560 02-12-2016, 07:07 PM
Last Post: MT91106
  Interior Paint / Dye digithead 6 746 02-08-2016, 11:04 PM
Last Post: Austin Vert



Users browsing this thread: 1 Guest(s)