• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sports roof interior pax door handle.
#1
Is there any difference between interior door handles? This door is not original as it is a different color on the inside and had a speaker. It fits "ok", but the latch assy it should bolt to has 2 alignment tabs, and the driver's has only 1. The 2 handles I have also have only 1 cutout for that alignment tab. Would I be looking for a deluxe handle to go with this door or what?
  Reply
#2
LET US SEE SOME PICTURES
  Reply
#3
Wrench 
Hello Danno,

Yes, There are 2 different door handles. One for the standard door panel and one for the Deluxe Door panel. Here is the info from the Ford Master Parts.

[Image: 35aqaop.jpg]

Control and Link Assembly

[Image: 9r5d1t.jpg]

Handle-Door Inside

[Image: 20ji78m.jpg]

Source: Ford Motor Master Parts Catalog

I was trying to find a better illustration, but the book only shows the standard door pull and latch.

Thank You

mustang7173 Smile
  Reply
#4
WILLIAMPARDELL;125069 Wrote:LET US SEE SOME PICTURES
Not too clear on how to post pics. Have tried before with no luck.
I will try to describe what I am trying to say............
My driver's interior handle assy is a pull type, attached by one bolt to the latch assy. The latch assy has one raised tab that sort of aligns a slot in the handle onto the latch and the bolt hole on the latch. The pax side, a different door, has the same looking latch assy except it has two tabs, and since the handles I have have only one slot, they will not align on the latch. Where do I get a handle with 2 slots?Undecided

mustang7173;125075 Wrote:Hello Danno,

Yes, There are 2 different door handles. One for the standard door panel and one for the Deluxe Door panel. Here is the info from the Ford Master Parts.

[Image: 35aqaop.jpg]

Control and Link Assembly

[Image: 9r5d1t.jpg]

Handle-Door Inside

[Image: 20ji78m.jpg]

Source: Ford Motor Master Parts Catalog

I was trying to find a better illustration, but the book only shows the standard door pull and latch.

Thank You

mustang7173 Smile
Thanks. This the exact way my driver's door looks. The pax door latch has 2 tabs. You can see the driver's door handle has 1 slot, I would need a handle with 2 slots to work on the pax latch.....
  Reply
#5
Danno,

When respond to a thread, click on preview post and there you can use the Tinypc to upload your pictures. Sometimes the upload does not work. So, I copy and paste the link into the post.

mustang7173
  Reply
#6
mustang7173;125112 Wrote:Danno,

When respond to a thread, click on preview post and there you can use the Tinypc to upload your pictures. Sometimes the upload does not work. So, I copy and paste the link into the post.

mustang7173
Looked at the latch again and saw that there is a small plate riveted to it, that if removed, will make it a standard latch. This plate has the second tab in it. Removing it leaves only the latch with the tab in the middle, where it will align with a standard pull handle.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Interior Quarter Panel screw JimB73 7 193 4 hours ago
Last Post: JimB73
  Door Sound/Heat Deadening EdM 8 241 10-14-2018, 04:39 AM
Last Post: goodnigh
  Misc. Exterior and Interior Odds/Ends icejawa 48 1,808 10-05-2018, 05:26 PM
Last Post: icejawa
runninpony Interior Quarter Panels NOT A T5 8 296 09-29-2018, 05:17 PM
Last Post: 71 gbvert
runninpony Interior Quarter Panels NOT A T5 4 311 09-11-2018, 04:28 PM
Last Post: NOT A T5
  Mach1 - interior upper rear panel to rear window Engine302 13 616 08-31-2018, 01:41 PM
Last Post: Mister 4x4
  door guts Copestang 9 509 08-24-2018, 10:52 PM
Last Post: batwrangler
  Avocado Interior 67aj 10 842 07-21-2018, 10:55 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)