• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Source for a 7x14 mag 500 painted wheel
#1
I need a 7x14 mag 500 painted wheel not a chromed one,,, all I can find is the chromed version,,, I will refinish and repaint, but it needs to be sound with no major rust
  Reply
#2
I did not realize they had a painted version for our carsHuh
  Reply
#3
well it may not have been the original wheels for the car thats for sure
  Reply
#4
pposey;38329 Wrote:well it may not have been the original wheels for the car thats for sure

Oh ok makes since post a pic of what you are looking for
  Reply
#5
These are not mine but are the same wheels I believe,,, they ended up on alot of cars in the 70's

[Image: Ford-78-LTD-Ranchero-Magnum-Rim-Duo.jpg]




and this is how I am running them now except that I have painted the brake drums flat black instead of silver
[Image: old%20rings%20on%20wheel.JPG?psid=1&ck=0&ex=720]

  Reply
#6
pposey;38316 Wrote:I need a 7x14 mag 500 painted wheel not a chromed one,,, all I can find is the chromed version,,, I will refinish and repaint, but it needs to be sound with no major rust

I have 4 of them and was about to blast them before selling them. Email me what you think they are worth. They are in good condition with only surface rust in spots. The beauty rings are not so beautiful though.

2011 Buick Regal
2010 Ford F150 Screw
2002 Triumph Trophy
1973 Dodge Challenger RT
1972 Mustang Grandé Coupe
1954 Ford F100
  Reply
#7
I´ll chime in on this one: Does anybody know if those beauty rings are available as repros in 15 inch?

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#8
I have seen them but the hard part is finding ones deep enough,,, my rings are 2 and 15/16ths inches deep,,, most you find are just 2.5 inches and they leave a large crack between the ring and the inner wheel,,,

Fordication,, PM sent
  Reply
#9
pposey;38508 Wrote:I have seen them but the hard part is finding ones deep enough,,, my rings are 2 and 15/16ths inches deep,,, most you find are just 2.5 inches and they leave a large crack between the ring and the inner wheel,,,

Fordication,, PM sent

I've bought a few sets of trim rings for my 15 x 7 interceptor wheels. i think they are 3" deep. Go to ebay and search or try googling it.
  Reply
#10
There are more out there for 15 inch wheels I believe,,, not as many for my 14 inch
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1973 slot mags wheel nut torque setting Nige 6 228 04-17-2018, 12:28 AM
Last Post: Nige
  Slot Mag Wheel Nuts Nige 17 519 04-10-2018, 03:55 PM
Last Post: Nige
  Wheel advise Jason Watt 14 776 12-14-2017, 04:59 PM
Last Post: Boss1Ray
  15x7 steel wheel 1972cjrag 5 821 07-07-2017, 03:02 PM
Last Post: Carolina_Mountain_Mustangs
  Tilt Steering Wheel? Mustangfeverrr 10 1,559 06-12-2017, 12:23 PM
Last Post: Mustangfeverrr
  1973 Factory Aluminum Forged Wheel as a spare OLE PONY 5 832 01-05-2017, 09:04 PM
Last Post: Henry Ford
  73 alum wheel restoration. What have people done? NG8264723 6 576 01-03-2017, 03:08 PM
Last Post: Mister 4x4
  Austin Vert asks about '73 Mag Wheels Austin Vert 0 350 12-03-2016, 04:59 PM
Last Post: Austin Vert



Users browsing this thread: 1 Guest(s)