• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SOLD TinMan Fab subframe connectors (need work). $50+ shipping.
#1
   

A pair of TinMan subframe connectors. (The ones on the top in the photo) They were incorrectly welded up at TinMan, the tab to weld onto the rear subframe is on the wrong side of the tube, along with the spacer up front. You would need to fab and weld on a new bracket for the rear end of the subframe connectors. Up front I would leave it alone, I think that it being on the wrong side actually helps out on a 71-73. The ones in the bottom of the photo are correct to give you an idea what they should look like.

I bought them 10+ years ago, got partial refund because of the goof. I ended up buying another pair, and don't need two.

$50 plus shipping. They are not small or light, so I am guessing shipping will be $30-60 depending on how far away you are from 96013.

Peter
  Reply
#2
Were they for coupe/ fastback or vert?

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#3
73pony;288910 Wrote:Were they for coupe/ fastback or vert?

They are supposed to fit all of the above.

http://www.tinmanfabrication.com/index.c.../prd58.htm

That being said they seem to have a little too much offset in them and don't seem to fit a 71-73 perfectly. I took my other set and straightened them out a tiny bit to make them fit better. There is a note in their installation instructions about fit not being perfect on a 71-71. However they are nice and tight to the floor pan.

Peter
  Reply
#4
SOLD!

Peter
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  SOLD: 1973 Deluxe Rear Bumper with Bumper Guards OLE PONY 6 1,315 11-28-2018, 08:55 PM
Last Post: OLE PONY
  SOLD Mike429cj 0 205 10-28-2018, 06:29 PM
Last Post: Mike429cj
  A/C Heater Control Restored—SOLD Mike429cj 4 489 10-01-2018, 09:31 PM
Last Post: Mike429cj
  [FOR SALE] SOLD!!! March 351C pulley and bracket setup for alt & PS Bentworker 2 446 08-15-2018, 10:07 AM
Last Post: Bentworker
  Finally sold my 72 Bright Lime Vert today kevken1959 28 1,540 05-24-2018, 09:26 AM
Last Post: kevken1959
  SOLD! 1971 H Code Mach 1-Originally Sold in Dallas., TX $25.9K griffbl 4 722 05-08-2018, 11:36 AM
Last Post: griffbl
  SOLD...OEM Style Power Steering Pump Rebuilt By Lee Engineering 4mm 0 498 02-21-2018, 12:12 AM
Last Post: 4mm
  'NEW' Suspension complete for $1,000 +shipping Bru 14 1,699 12-07-2017, 09:49 AM
Last Post: Bru



Users browsing this thread: 1 Guest(s)