• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Show us your engines!
#51
(12-05-2017, 11:06 PM)73pony Wrote:
(12-05-2017, 08:52 PM)downwardspiral Wrote: Pretty much stock 357 Cleveland. 
[Image: 84csural.jpg]
Yep. Looks stock to me. Smile

Nice fuel injection.


        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
#52
(12-05-2017, 11:06 PM)73pony Wrote: Yep. Looks stock to me. Smile
Just some bolt ons  whistling It shouldn't be anything special though, just a 10:1 aussie headed street-ish motor with a solid roller. Hoping to make 400 hp or so just under 7000 rpm.
(12-05-2017, 11:11 PM)tony-muscle Wrote: Nice fuel injection.
Thanks, I hope it works lol
  Reply
#53
(12-06-2017, 06:16 PM)downwardspiral Wrote:
(12-05-2017, 11:06 PM)73pony Wrote: Yep. Looks stock to me. Smile
Just some bolt ons  whistling It shouldn't be anything special though, just a 10:1 aussie headed street-ish motor with a solid roller. Hoping to make 400 hp or so just under 7000 rpm.
(12-05-2017, 11:11 PM)tony-muscle Wrote: Nice fuel injection.
Thanks, I hope it works lol

Stock engine block color too!
  Reply
#54
(12-06-2017, 06:16 PM)downwardspiral Wrote: Just some bolt ons  whistling It shouldn't be anything special though, just a 10:1 aussie headed street-ish motor with a solid roller. Hoping to make 400 hp or so just under 7000 rpm.

I assume you're talking about 400 HP at the rear wheels, I'm thinking quite a bit more than that at the flywheel. thumb


“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#55
(12-06-2017, 08:02 PM)midlife Wrote: Stock engine block color too!
I'll probably tell people it's an olds motor for fun.
[Image: Otu0LkZ.gif]
(12-06-2017, 08:49 PM)Don C Wrote: I assume you're talking about 400 HP at the rear wheels, I'm thinking quite a bit more than that at the flywheel. thumb
That'd be a nice surprise, I hope you're right haha. My injectors will only support 500 hp though, I should be able to get an idea from the duty cycle they run at.
  Reply
#56
I'm Liking the way mine looks more each day.  Of course I don't have the AC in the way yet.


Attached Files Thumbnail(s)
   
  Reply
#57
Little 302 in my '73 convertible. Have added a few bits added over the years; Motorsport 351W ported heads with roller rockers, Holley 600CFM carb on a Ford 65 4V manifold I bought from a "Pull-your-own" yard YEARS ago - remember those? -, headers and custom dual exhaust.

Bill

[Image: 3.jpg]
  Reply
#58
Without glitter and glamor...., simply the Original  thumb


[Image: Engine_351_cui_2v_Cleveland.jpg]

Greetings from Heidelberg in Germany

Klaus
[Image: 1_31_03_16_10_26_59.png]
The later you brake the longer you're fast. devil
  Reply
#59
hey duck can I get any images of your engine bay in maybe close up quarters, maybe with the air cleaner off? They could be very helpful in the finishing of the restoration of my 72 that was originally a 351 2v. PM me and I'll give you my email.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Show us your valve covers tony-muscle 55 3,813 10-24-2017, 08:10 PM
Last Post: Hemikiller
  What fuel pump you guys using for your modded engines? Electric or mechanical? 4mm 18 1,824 06-04-2015, 10:46 PM
Last Post: Mister 4x4
  Is this a component of our 351c engines? Wolverine 9 1,514 12-27-2012, 08:21 PM
Last Post: c9zx
  engines out not2old 6 1,721 09-19-2010, 01:56 PM
Last Post: not2old



Users browsing this thread: 1 Guest(s)