• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sherman Parts
#1
I am looking for sheet metal for my 73 Mustang. Has anyone used fenders and a decklid from Sherman Parts? Are they quality pieces?

Thanks,
Mark
  Reply
#2
Try here:
http://www.7173mustangs.com/forum-ohio-mustang-supply

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#3
The Dynacorn pieces fit well.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#4
I have a deck lid. I can take better pics in the morning.


Attached Files Thumbnail(s)
   
  Reply
#5
I use lower door skins from Mill supply. Still some work but the joint is about 2" above the brake so it's easy to block level it.
  Reply
#6
I have a good fender if you're interested.

[Image: 1_14_01_12_10_54_29.png]

Ken

73 Convertible 302-4v-3spd yellow /white int

08 Bullitt 4.6-5 spd black/black int


All I ask is a chance to prove that money can't make me happy
  Reply
#7
I have bought from Sherman in the past. Malibu parts but I had no problems with them and the service was good.
  Reply
#8
I bought quarters about 10 years ago and the fit nice. They are located about 1 mile away from my house. Good size facilty.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Scored some good parts today vintageman 1 299 07-24-2018, 07:14 PM
Last Post: c9zx
  Body parts kits?? soonerbillz 5 398 07-03-2018, 08:47 AM
Last Post: soonerbillz
  What are these parts called? Paul113 7 684 07-03-2018, 08:34 AM
Last Post: soonerbillz
Stang Dynacorn parts and measurements for chassis straightener Ballaratcastle 16 985 06-13-2018, 04:54 AM
Last Post: Ballaratcastle
  Bolting on freshly painted parts turtle5353 8 757 05-01-2017, 05:08 AM
Last Post: luxstang
  Parts Bondobax 4 792 04-21-2017, 04:05 PM
Last Post: tony-muscle
  Rust removal on bare interior parts with washing soda Bentworker 10 1,375 01-29-2017, 11:40 AM
Last Post: Bentworker
  Save 30% on body & sheet metal parts Pegleg 0 534 10-25-2016, 03:46 PM
Last Post: Pegleg



Users browsing this thread: 1 Guest(s)