• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Serious top end
#1
Just thought I would share this. SCE manifold on some D3s sitting in a prominent QLD engine builders shop. The manifold will need some work to fit the lifted port location of the Yates heads. Scott Cook has stated that he has some new manifolds on the way that should bolt straight up.


Attached Files Thumbnail(s)
   

He has all the vices I admire and none of the virtues I despise
  Reply
#2
Wow an air gap on steroids. That will move some air.
  Reply
#3
Wow that is so awesome stuff

Sendt fra min F8331 med Tapatalk

So I'm a proud owner of one Mach 1 73! Regards Lars DK73whistling
  Reply
#4
Great post Luke, I think Scott has one or two:


.jpg   scm manifolds.jpg (Size: 44.44 KB / Downloads: 115)

...Mickus
  Reply
#5
Nice, I like it, I like it a lot, lol. Looks to be one of Scott's ain't supremacy intakes. These intakes are a great thing for top end and by the sounds of things nothing can touch it in the high RPM range. I read about one guy that put one on his basically tuff street driven (bit of strip too) and them complained about the drivability, lol, what an idiot thinking this would be a good intake on the street. Scott cook does some magic stuff and works a lot with Darrin Morgan to design and develop his stuff. Spoke with Scott on line a few years back and he's a very knowledgeable guy, especially when it comes to Clevelands. One of the reasons I'm going to use his dual plane on the new engine, if I wanted to build an all out engine, I'd go for a pair of his heads too. Some very tuff Clevos over here running his gear and also CHI. 9 second street cars, drive to the track and drive home are becoming a common thing these days, could only wish for those numbers from a drag only engine not that long ago. BTW Luke I take it that shop is up north, is that engine yours for the Monaro, lol. That upsets the Holden boys like the Torana with the Cleveland legally fitted to it.
  Reply
#6
It was at Tremaniac racing in browns plains. They seem to be putting together some very Tuff sbf stuff at the moment 900hp out of 440-450 cube engines very stout. Scott Cook gear is great a friends xy ute is making just on 530hp with his dual plane and heads love it because it looks almost stock when you lift the lid on it.
Sorry Jason no Clevos for this Monaro lol.

He has all the vices I admire and none of the virtues I despise
  Reply
#7
Luke;288811 Wrote:It was at Tremaniac racing in browns plains. They seem to be putting together some very Tuff sbf stuff at the moment 900hp out of 440-450 cube engines very stout. Scott Cook gear is great a friends xy ute is making just on 530hp with his dual plane and heads love it because it looks almost stock when you lift the lid on it.
Sorry Jason no Clevos for this Monaro lol.

Ah ha didn't even think of them, I was thinking maybe JB in Ayr. They (JB) not long ago built a 660+ HP standard stroke, solid F/T cast headed 2V, runs high 9's in 3500 lb Falcon, more in it but have had some dramas. Yeah mate Tremaines sure do build some tuff stuff, that's why they're pro stock champs over here. I remember when they were having their engines built by Schaffiroff, but after a while and many dollars decided to go their own way and open the shop. May have to contact them about machine work on my block.
Don't worry mate, I've heard a 186 with a 500 Holley and XU-1 cam with headers will make 500HP, lol. That'll work for the Monaro rofl
  Reply
#8
4Vforever;289031 Wrote:
Luke;288811 Wrote:It was at Tremaniac racing in browns plains. They seem to be putting together some very Tuff sbf stuff at the moment 900hp out of 440-450 cube engines very stout. Scott Cook gear is great a friends xy ute is making just on 530hp with his dual plane and heads love it because it looks almost stock when you lift the lid on it.
Sorry Jason no Clevos for this Monaro lol.

Ah ha didn't even think of them, I was thinking maybe JB in Ayr. They (JB) not long ago built a 660+ HP standard stroke, solid F/T cast headed 2V, runs high 9's in 3500 lb Falcon, more in it but have had some dramas. Yeah mate Tremaines sure do build some tuff stuff, that's why they're pro stock champs over here. I remember when they were having their engines built by Schaffiroff, but after a while and many dollars decided to go their own way and open the shop. May have to contact them about machine work on my block.
Don't worry mate, I've heard a 186 with a 500 Holley and XU-1 cam with headers will make 500HP, lol. That'll work for the Monaro rofl

186 is overkill. I have a 149 here that will slip straight in! Big Grin
  Reply
#9
mickus;289035 Wrote:
4Vforever;289031 Wrote:
Luke;288811 Wrote:It was at Tremaniac racing in browns plains. They seem to be putting together some very Tuff sbf stuff at the moment 900hp out of 440-450 cube engines very stout. Scott Cook gear is great a friends xy ute is making just on 530hp with his dual plane and heads love it because it looks almost stock when you lift the lid on it.
Sorry Jason no Clevos for this Monaro lol.

Ah ha didn't even think of them, I was thinking maybe JB in Ayr. They (JB) not long ago built a 660+ HP standard stroke, solid F/T cast headed 2V, runs high 9's in 3500 lb Falcon, more in it but have had some dramas. Yeah mate Tremaines sure do build some tuff stuff, that's why they're pro stock champs over here. I remember when they were having their engines built by Schaffiroff, but after a while and many dollars decided to go their own way and open the shop. May have to contact them about machine work on my block.
Don't worry mate, I've heard a 186 with a 500 Holley and XU-1 cam with headers will make 500HP, lol. That'll work for the Monaro rofl

186 is overkill. I have a 149 here that will slip straight in! Big Grin
Only the heads are any good from those 149's, just ask the Holden know it alls. All I can tell you is that they are the most delusional people I've ever met when talking of power outputs. Some of the stories I could tell of their "fast" engines would have you in stitches, especially red motors, lol.
  Reply
#10
Haha

He has all the vices I admire and none of the virtues I despise
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  rear end conversion don blanchard 5 336 05-08-2019, 06:13 AM
Last Post: turtle5353
  351 Top end reinstall questions scgamecock 2 226 02-22-2019, 05:54 PM
Last Post: kcmash
  Regear Rear End icejawa 30 1,128 02-07-2019, 01:23 PM
Last Post: Hemikiller
  Recommended Rear End Ratio - 6 Speed TheDude 17 804 12-27-2018, 08:28 PM
Last Post: boilermaster
  rear end markc 6 514 10-14-2018, 12:24 PM
Last Post: markc
  my rear end is getting loose and making noise nailpounder 15 697 09-09-2018, 01:15 PM
Last Post: Don C
  1971 1973 mustang muffler top hat mounts mustang7173 17 898 08-17-2018, 09:21 PM
Last Post: mustang7173
  Rear End goodnigh 5 629 08-06-2018, 02:31 PM
Last Post: secluff



Users browsing this thread: 1 Guest(s)