• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rust where B pillar attaches to rocker
#21
(05-08-2019, 11:41 AM)Carolina_Mountain_Mustangs Wrote: If you cannot find one go to Facebook and friend Scotty Strickland in Oxford, NC he has a Mustang junk yard with dozens of them. Any body style of mustang should work for that corner. I have one but also rusty.
He does work a regular job on third shift so might be slow getting back.


Thank you! I will definitely keep him in mind.


Sent from my iPhone using Tapatalk
  Reply
#22
I have some B-Pillar cutouts from a 72 parts car I had years ago. I will snap a picture and post it up to confirm they are what you need. If they are we can discuss further in PM.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#23
(05-09-2019, 08:21 AM)bkdunha Wrote: I have some B-Pillar cutouts from a 72 parts car I had years ago. I will snap a picture and post it up to confirm they are what you need. If they are we can discuss further in PM.


That would be great! Thank you!


Sent from my iPhone using Tapatalk
  Reply
#24
Sorry, for not getting back with you. My son graduated from High School this weekend so it was a bit crazy around the house in addition to selling the house and getting the buyer's inspection completed late last week. I will snap the pictures tonight.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#25
(05-13-2019, 08:17 AM)bkdunha Wrote: Sorry, for not getting back with you. My son graduated from High School this weekend so it was a bit crazy around the house in addition to selling the house and getting the buyer's inspection completed late last week. I will snap the pictures tonight.


Not a problem! I’m in no rush.


Sent from my iPhone using Tapatalk
  Reply
#26
Here are the parts. PM me if they are what you need. The prime red parts I think are the inner panels that are behind the B-pillar door jamb panel. I am not sure if others could verify.
[Image: E0-E42-CD3-B28-F-4253-87-B8-B14-F04100-EFE.jpg]

[Image: 7830-C822-F539-44-E8-B2-EA-A8-CC8-E30-BC7-E.jpg]

[Image: 30-D772-BA-509-F-4225-A291-6-ED36-D9-AE721.jpg]

[Image: F99-F7-C81-92-CD-4-F1-A-9-A13-C7-C0-F53-CEE22.jpg]

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#27
(05-13-2019, 08:08 PM)bkdunha Wrote: Here are the parts. PM me if they are what you need. The prime red parts I think are the inner panels that are behind the B-pillar door jamb panel. I am not sure if others could verify.
[Image: E0-E42-CD3-B28-F-4253-87-B8-B14-F04100-EFE.jpg]

[Image: 7830-C822-F539-44-E8-B2-EA-A8-CC8-E30-BC7-E.jpg]

[Image: 30-D772-BA-509-F-4225-A291-6-ED36-D9-AE721.jpg]

[Image: F99-F7-C81-92-CD-4-F1-A-9-A13-C7-C0-F53-CEE22.jpg]


Hmm the red ones look slightly like what I need however on the curvature It looks like I need farther towards the interior than the cutout. Here is what I’m dealing with unfortunately. [Image: 75769643687b0d97348a14bad3940578.jpg]


Sent from my iPhone using Tapatalk
  Reply
#28
(05-13-2019, 08:13 PM)Usafsac Wrote:
(05-13-2019, 08:08 PM)bkdunha Wrote: Here are the parts. PM me if they are what you need. The prime red parts I think are the inner panels that are behind the B-pillar door jamb panel. I am not sure if others could verify.
[Image: E0-E42-CD3-B28-F-4253-87-B8-B14-F04100-EFE.jpg]

[Image: 7830-C822-F539-44-E8-B2-EA-A8-CC8-E30-BC7-E.jpg]

[Image: 30-D772-BA-509-F-4225-A291-6-ED36-D9-AE721.jpg]

[Image: F99-F7-C81-92-CD-4-F1-A-9-A13-C7-C0-F53-CEE22.jpg]


Hmm the red ones look slightly like what I need however on the curvature It looks like I need farther back than the cutout. Here is what I’m dealing with unfortunately [Image: 75769643687b0d97348a14bad3940578.jpg]


Sent from my iPhone using Tapatalk

Sorry for the poor pictures. I had my wife send them to me while I’m at work.

[Image: 62b0eea02e8da5b5e660fffbc6a19ac0.jpg]



Sent from my iPhone using Tapatalk
  Reply
#29
Ouch! you have some work ahead of you there. Sorry they do not look like they will be what you need. Those areas are not reproduced yet so you will need to find a donor car to cut from.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#30
(05-14-2019, 07:53 AM)bkdunha Wrote: Ouch! you have some work ahead of you there. Sorry they do not look like they will be what you need. Those areas are not reproduced yet so you will need to find a donor car to cut from.


Yeah, it’s pretty bad however it’s only on the quarter panel and that area of the B pillar. Other than that the car is really good! Hopefully I can find someone with a good patch they’re willing to cut since there’s not any donors in my area.


Sent from my iPhone using Tapatalk
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bad Rattle from Passenger A-Pillar / Dash Pad area griffbl 8 1,450 08-21-2017, 10:05 AM
Last Post: griffbl
  Primary/rust prevention Shields 7 1,316 04-28-2016, 07:22 AM
Last Post: Qcode351mach
  Rocker Panel Repair Maiden Dearborn 34 11,146 11-06-2015, 11:35 AM
Last Post: tony-muscle
  Cowl Rust Repair Step-by-Step 69 Rustang 10 4,969 01-15-2015, 05:26 PM
Last Post: Duncan Mach72
  B-Pillar Interference kcmash 5 1,187 07-21-2014, 09:58 PM
Last Post: cudak888
  Evapo-Rust... Anyone use this? mach1000 17 2,949 09-13-2013, 11:14 AM
Last Post: mustang7173
  Major structural/rust issues - advice sought reconrover 17 2,771 05-24-2013, 10:16 AM
Last Post: OMS
  Rust repair kornpuffer 5 1,577 03-04-2013, 12:38 PM
Last Post: kornpuffer



Users browsing this thread: 1 Guest(s)