• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Russel brake hoses
#1
I order me a set of Russel braided steel hoses(Summit). But in the set are only the front lines. Can every one of you tell me where i can buy a hose for the rear?
Thanks David

[Image: t5Banner.jpg]
  Reply
#2
Found one on Ebay, thanks

http://cgi.ebay.com/ebaymotors/ws/eBayIS...ADE%3A1123

[Image: t5Banner.jpg]
  Reply
#3
I built my own with the factory brass block and some 3/16 stainless flex hose and fittings obtained from a local dirt track / racer store, Smileys. Cost me about $35 and a little time.

[Image: attachment.php?aid=3230]
  Reply
#4
Nice job Curtis... I'm assuming you're Curtis. Big Grin

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#5
yes, RacerX is Curtis.
I did that as I couldn't find the correct standard lines easily and then a buddy hooked me up with a local dirt track shop, smileys. they are great folks and I got all the pieces I needed the same day and could physically look at and hold the fittings to mock it up and make sure I had the right combination of pieces. Hardest part was removing factory line from axle distribution block, drilling it perfectly perpendicular to the block. Then tap it for 3/8"-24 fitting. Polish the brass, clearcoat it and it's done.
  Reply
#6
You could have found it HERE
OMS
Ohio Mustang Supply


Item #H78075
71-73 BRAKE HOSE REAR - Disc or drum rear brake hose, reproduction.


1971 1972 1973 Mustang.
Price: $46.95
Qty:





Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  brake fluid / nailpounder 2 134 02-11-2019, 12:33 PM
Last Post: nailpounder
  wilwood disc brake question nailpounder 3 235 01-21-2019, 07:45 PM
Last Post: nailpounder
  Shock Tower Brake line grommets jowens1126 7 252 01-01-2019, 07:29 PM
Last Post: Stanglover
  power steering hoses and routing Paul113 14 1,670 12-31-2018, 07:49 PM
Last Post: Pastorpat
  Brake Booster Rebuild Omie01 6 256 12-28-2018, 08:15 AM
Last Post: Omie01
  Changing out brake lines for Stainless jowens1126 17 620 12-12-2018, 07:56 AM
Last Post: mustang7173
  Brake Distribution rambot 9 581 10-22-2018, 02:31 PM
Last Post: jowens1126
  Rear brake hose too short? Omie01 3 507 08-22-2018, 07:41 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)