• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RESTO TIPS WITH-Q NEW VIDEO
#1
Hey Guy's been quite some time since I posted up some new vids...I fiqured I would do a quick one on the console I'm repairing restoring for the New Mach
ENJOY!Big Grin
http://www.youtube.com/watch?v=lE0pqW2tFE0

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
  Reply
#2
Scott,
I really enjoy your videos. Great stuff!
I was wondering if you have any on proper leading procedures? I would like some pointers on this old school process.
I pretty much have gone to brazing using my cobra torch since I can never seem to get lead to stick reliably.
Regardless of prep or amount of heat.
My goal is to no use any bondo on my resto project and I'm sure a good lesson on leading is all I need to get me on the right track.

Thanks,
Phil

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#3
Phil, I'm sure Scott can help but I know one of our Austrian users (canadian_red_maple_leaf, name's Abudi) used the leading process on his 71 Boss.

ETA: Here's the thread: http://www.7173mustangs.com/thread-my-19...estoration. He's tinning it but from what I gather it's the same process.

Steve



[Image: 25yvyp3.jpg]
  Reply
#4
Thanks Steve, The link didnt work?

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#5
philt;80906 Wrote:Scott,
I really enjoy your videos. Great stuff!
I was wondering if you have any on proper leading procedures? I would like some pointers on this old school process.
I pretty much have gone to brazing using my cobra torch since I can never seem to get lead to stick reliably.
Regardless of prep or amount of heat.
My goal is to no use any bondo on my resto project and I'm sure a good lesson on leading is all I need to get me on the right track.

Thanks,
Phil
Thanks Phil,
If you truly want to go bondo free then you need to learn how to use a shrinking disc. I have a vid on using it & how I repaired a big dent in a door
http://www.youtube.com/watch?v=OpGwsJOQdvI&feature=plcp
http://www.youtube.com/watch?v=TemegfS_8bI&feature=plcp

http://www.7173mustangs.com/thread-pics-...nking+disc

it sounds like your metal isn't cleaned tinned properly..Also a propane torch with mapp gas works much better ! I bet the acetylene from the cobra torch is contaminating the area.. Which tinning butter & lead are you using ? Also here's a member who followed my advice recommendations & his results

http://www.7173mustangs.com/thread-shrinking-disk

Here's a quick vid on using the eastwood kit just search on you tube there's lots more..The key for first time users is to clean everything including the solder sticks themselves before use.

http://www.youtube.com/watch?v=CCrlLyXp2i4

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
  Reply
#6
Great video's...Thanks for the share
  Reply
#7
They make it look so easy....

I actually like this video...
http://www.youtube.com/watch?v=jQ_85fp1a...embedded#!

http://www.youtube.com/watch?v=SD98LDc0G...ure=fvwrel
Now Im convinced Im just not prepping the metal properly. I didnt use the proper tinning butter.
Cool stuff. I need to try this again with the right products.

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#8
Thanks for posting those leading videos...that's a real art!

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  VIDEO-DENT REPAIR 101 PART 2 Qcode351mach 12 2,668 11-14-2015, 08:43 AM
Last Post: DK73
  RESTO TIPS --FORM FITTING TRIM Qcode351mach 9 1,777 04-05-2013, 12:27 PM
Last Post: imusa76
  TAIL LAMP RESTO WITH -Q VID PART 2 Qcode351mach 14 3,195 02-11-2013, 07:34 AM
Last Post: Qcode351mach
  MUSTANG PROGRESS--VIDEO Qcode351mach 11 2,629 02-02-2013, 07:29 AM
Last Post: URUGUAYAN_FASTBACK
  VIDEO-RESTO TIPS Qcode351mach 6 1,755 01-13-2013, 01:03 AM
Last Post: caspianwendell
  RESTO TIPS WITH --Q--HINGE REBUILD Qcode351mach 14 3,400 01-11-2013, 01:37 AM
Last Post: TheJ
  PROGRESS VIDEO--1/7/13 Qcode351mach 10 2,203 01-09-2013, 12:04 AM
Last Post: 71_resurrection
  VIDEO--END OF WEEK STATUS Qcode351mach 8 1,402 12-16-2012, 12:10 AM
Last Post: KingKong



Users browsing this thread: 1 Guest(s)