• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Resistor wire to factory Tach
#1
Could anyone help me this this issue. What is the corrrect resistance of the resistor wire that feeds the factory tach in a 71 mustang? Mine measures 2.8 ohms. Huh

Ninasteel
  Reply
#2
(12-31-2018, 12:07 PM)ninasteel Wrote: Could anyone help me this this issue. What is the corrrect resistance of the resistor wire that feeds the factory tach in a 71 mustang? Mine measures 2.8 ohms. Huh

Ninasteel

My 72 schematic shows 1.3-1.4 ohms. Chuck
  Reply
#3
Are you just measuring the resistance of the pink resistor wire, or the entire circuit? It should be around 1.4 ohms.

That wire doesn't actually feed the tach. The ignition circuit runs from the ignition switch to, and through, the tach, and then to the coil.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
(12-31-2018, 01:39 PM)c9zx Wrote:
(12-31-2018, 12:07 PM)ninasteel Wrote: Could anyone help me this this issue. What is the corrrect resistance of the resistor wire that feeds the factory tach in a 71 mustang? Mine measures 2.8 ohms. Huh

Ninasteel

My 72 schematic shows 1.3-1.4 ohms. Chuck

Thanks Chuck!! Wink
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Dome light wire and where to plug Rmach1 2 169 05-10-2019, 01:12 PM
Last Post: Mister 4x4
  Wiring Up Factory Radio icejawa 3 167 04-22-2019, 08:26 PM
Last Post: 73pony
  WIRE iDENTIFICATION jackf 4 155 04-16-2019, 06:25 AM
Last Post: jackf
  Factory tach and center gauges without changing harness? TheDude 16 1,023 01-07-2019, 09:28 PM
Last Post: midlife
  Tach and dash wiring/lights project rjpohl 4 419 01-04-2019, 05:18 PM
Last Post: rjpohl
  dash wire left to right kick panel rjpohl 1 309 11-21-2018, 07:36 PM
Last Post: Don C
  tach 164runner 1 327 09-18-2018, 05:19 AM
Last Post: midlife
Wrench Wire splices John J 7 543 08-25-2018, 04:00 PM
Last Post: midlife



Users browsing this thread: 1 Guest(s)