• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Repro tail light lens & bezels
#1
After looking over my old tail light lens and bezels I'm thinking about the new repros. My housings are in good shape still so I think I'll reuse them. Did anyone have fitment issues using there old housings with new lens and bezels? Also what is the best way for separating the housings from the lens without damaging them? What kind of glue do you use to glue them back together? Ryan

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#2
I ordered the reproduction lenses for my 1973 recently.They look really nice! If it is for your 1972 mach then it might be easier to repaint the reproduction unit black around the lenses. Somebody on the forum has done this before and it looks amazing!

http://www.7173mustangs.com/thread-advic...tail+light
  Reply
#3
The gasket is glued on
Slowly work it off
The lens and housing snap together
There is a tab at the top and two at the bottom
You have to bend the top tab up then pry them apart

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#4
OMS;288345 Wrote:The gasket is glued on
Slowly work it off
The lens and housing snap together
There is a tab at the top and two at the bottom
You have to bend the top tab up then pry them apart

Thanks Don.

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
#5
JD79;288337 Wrote:I ordered the reproduction lenses for my 1973 recently.They look really nice! If it is for your 1972 mach then it might be easier to repaint the reproduction unit black around the lenses. Somebody on the forum has done this before and it looks amazing!

http://www.7173mustangs.com/thread-advic...tail+light

Thanks for the info.

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  71-72 Mach I grill identification (OEM vs repro) rpxr400 1 193 06-16-2019, 09:33 AM
Last Post: Carolina_Mountain_Mustangs
  Can you see the dash turn signal light indicator? tony-muscle 11 377 06-04-2019, 09:15 AM
Last Post: tony-muscle
  Center Console Map Light 73pony 12 2,762 01-05-2019, 03:33 AM
Last Post: jt.db
  Front side marker light bulb jowens1126 4 349 11-10-2018, 11:18 PM
Last Post: Ed Raver
runninpony Round Seat Belt Warning Light Bezel NOT A T5 1 507 08-27-2018, 09:50 AM
Last Post: NOT A T5
runninpony glove box light switch and light NOT A T5 9 954 07-06-2018, 07:53 PM
Last Post: rackerm
  Cleaning Paint off of Dash Bezels kcmash 4 649 06-13-2018, 06:38 AM
Last Post: Pegleg
runninpony LED LIGHT BULBS NOT A T5 11 938 05-19-2018, 09:31 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)