• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement PItman Arm Seal
#1
well after a long time of procrastination of pulling the steering box i finally did it today before the old 460 that has been freshened up goes back in.

when i pulled the steering box out i ripped the seal for the pitman arm and i can't find it anywhere online but the entire pitman arm. i don't want to replace any parts that are in good shape. the pitman arm is just really a solid piece of cast iron. the splined areas is fine.

if anybody knows where to find the replacement seal would be great.
  Reply
#2
If you are talking about the sector shaft seal then check this link:
http://macsautoparts.com/steering-gearbo...HL1081529/

Steve
73 Mach 1 Blue Glow/Argent Q Code C6 Auto
73 Mach 1 Blue Glow/Argent Q Code 4 Speed
  Reply
#3
Steve73QMach1;78573 Wrote:If you are talking about the sector shaft seal then check this link:
http://macsautoparts.com/steering-gearbo...HL1081529/

no this is the seal that is on the pitman arm itself and then goes into the steering shaft itself. its kind of like the boot on the tie rod ends but is just sandwiched between two medals.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Replacement Suspension Components ITMike5.0 6 287 09-30-2018, 10:06 AM
Last Post: ITMike5.0
  P/S pitman arm Hemikiller 3 345 08-15-2018, 07:12 AM
Last Post: Stanglover
  Moog upper control arm Phisto 14 765 06-13-2018, 06:54 PM
Last Post: Danno
  Lower control arm and strut rod bushing help needed vikingsandpintos 5 835 12-11-2017, 10:21 AM
Last Post: OMS
  What is up with this upper control arm? vikingsandpintos 7 972 12-01-2017, 09:50 AM
Last Post: Hemikiller
  Ride Height, Correct Replacement Springs griffbl 6 1,680 07-31-2017, 01:14 PM
Last Post: griffbl
  Front End Replacement is Complete EdM 3 687 06-18-2017, 09:43 PM
Last Post: 73pony
  Pitman arm dust seal klinton994 1 681 03-31-2017, 03:08 PM
Last Post: secluff



Users browsing this thread: 1 Guest(s)