• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Redoing Fuel System
i am concerned about on lowered cars when you turn hard left the tire rubs against the fender a bit on the driver side. don't know if it comes close on the passenger side though.

i'd like some advice on how to route the lines in the fender well. i want to run the lines all the way to the front so keep more straight fittings instead of a bunch of 90 and have it near the headers.

below is a little more detailed explaination.

ok i finished up all the lines tonight! however i can't a place to put the large 6.5 10 mesh filter. i might have to look into carb inlet filters before the bowls and use double couplers.

i do have a pic on how the tire to fenderwell is and on the passenger side its like 2 inches or more so the tire coming close to the lines isn't an issues. just weird how it comes alot closer to the driver side though.

the only thing i could find right now for filtering before carb is this:


my current ones like this have the female swivel end and these have the male threads only. this will require me to use double couplers and it'll bring my return fitting pretty close to intake heat.

anybody else got ideas?
i'm going to extend the power wire to the pump and do a leak check on the entire system.

i'm also going to see how fast i can fill up a two gallon jug (need gas for lawn mower and it looks like the lawn mower is getting 91 Big Grin)

i broke down and put a second filter since i see how dirty pump gas is.
just wanted to report that this fuel system is happily feeding my 626hp 521 motor just fine and maintains pressures regardless of the conditions.

i'm pretty sure the 5/8's lines has a role in the situation as well.
You might want to start a blog
wwhite72;132875 Wrote:You might want to start a blog

not sure if your being sarcastic or serious! Big GrinBig Grin
and is the answer is "Yes" ? lol

[Image: 2cossj6.png]
97 F150: wrecked, 96 Dodge 4x4: blown motor / donated to the base
88 Suburban 4x4 355 cid 8 inch lift: sold, 95 Celica 5 speed : sold
68 F750 391 cid : sold,  96 F350 7.3 diesel dually : sold
86 Chevy 1500 305 cid c1500: sold, 73 Mustang mach 1 466 cid 5 speed : under construction
89 F350 4x4 cummins swap : sold, 64 Dodge d600: gone
00 Excursion: traded, 72 Mustang mach 1 302: scrapped
73 Mustang coupe: scrapped, 73 ranchero gt
06 Honda crf 450x : sold, 04 Honda vtx 1800
88 Bronco xlt lariat: sold, 76 Charger: traded
95 F350 4x4: sold , 91 Crown Victoria 302: sold
02 Dakota: traded, 96 f250 powerstroke: parts truck
87 f700, 98 e350 powerstroke: sold
03 land rover: traded, 95 f350 dually: part out
95 f350 dually: traded, 94 f150 4x4: traded
97 f250: sold, 76 Maverick 302: sold
91 240sx rb25: sold, 86 firebird: sold
86 Trans Am: sold, 88 westernstar: sold
89 dodge d350: sold, 2000 Dakota 4x4: sold  
84 f350 3+3: sold, 90 bronco: partout
67 catalina, 64 chevy c60
64 jeep j200, 74 corvette stingray
79 Lincoln mark V, 2013 f350: goldilocks
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Fuel Hose Kit NOT A T5 5 192 6 hours ago
Last Post: Rumblefish
  351C Fuel Delivery Problem Rumblefish 20 370 10 hours ago
Last Post: Fabrice
  1973 Mustang Coupe Exhaust System mustang7173 2 186 10-01-2018, 05:40 AM
Last Post: NOT A T5
runninpony Fuel Hose Diameter NOT A T5 2 144 09-26-2018, 06:17 PM
Last Post: NOT A T5
  351C fuel pumps? Hemikiller 5 410 09-02-2018, 07:12 AM
Last Post: clevelandcoupe
  quick fuel jpaz 52 2,592 06-11-2018, 10:06 AM
Last Post: 73pony
  fuel sender 1/2 inch OzCoupe72 5 402 04-22-2018, 10:05 PM
Last Post: OzCoupe72
  Exhaust System Kits and other questions scgamecock 6 561 03-28-2018, 04:00 PM
Last Post: red351

Users browsing this thread: 1 Guest(s)