• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear sway bar size
#1
I have a factory sway bar and I measure it at 1/2". I'm trying to replace all the bushings for it but summit and jegs can't find the bushings in that size. What am I missing?
  Reply
#2
I bought the 3/4" size and wrapped the sway bar with some scrap rubber strapping until the bushing fit and installed.
Thanks, Jay
  Reply
#3
(01-22-2020, 07:17 PM)clevelandcoupe Wrote: I bought the 3/4" size and wrapped the sway bar with some scrap rubber strapping until the bushing fit and installed.
Thanks, Jay
Which brand bar did you buy?
  Reply
#4
I replaced that size last year. They are out there. I'll see if I can find what vendor I used.
  Reply
#5
Not sure if this is the one I used or not, but a link to one example.

https://www.energysuspensionparts.com/9.5102

Scott
  Reply
#6
BeerDontCount Wrote:Not sure if this is the one I used or not, but  a link to one example.

https://www.energysuspensionparts.com/9.5102

Scott
Perfect. Thanks
  Reply
#7
You need to use the brackets that come with the bushings. The factory bushings are much taller.


  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Upgraded front sway bar rubbing strut rod Rmach1 2 159 02-02-2020, 09:04 PM
Last Post: Rmach1
  Advice on rear Leaf Spring / 71 351C 4V Stanglover 23 1,331 12-31-2019, 05:28 PM
Last Post: Stanglover
  Rear factory sway bar addition? cwalker509 3 356 10-09-2019, 03:39 PM
Last Post: Mister 4x4
  What colour factory sway bar 71-72 Mach 1s baz70 7 582 10-02-2019, 04:04 PM
Last Post: Rmach1
  Squeaky Leaf Springs/rear suspension andy72 4 325 09-22-2019, 12:08 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)