• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear sway bar Instructions
#1
Hi

Anyone got a pdf instruction on how to install the addco rear sway bar in a 73 ? There should be some drilling involved for sure.

[Image: 71-73-Ford-Mustang-Mercury-Cougar_1.JPG]

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#2
You can go to ADDCO's website and download instructions.
http://www.addco.net/aftermarket/catalog/ford/

It looks like #679 and #996 have complete instructions.
http://www.addco.net/aftermarket/tech/in...tructions/



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
(04-19-2019, 04:17 PM)Don C Wrote: You can go to ADDCO's website and download instructions.
http://www.addco.net/aftermarket/catalog/ford/

It looks like #679 and #996 have complete instructions.
http://www.addco.net/aftermarket/tech/in...tructions/


Great thanks Don, I looked around there Before but I just couldnt find it.

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#4
Found the instructions, its for a car that already has the sway bar stock.

So I refrase has anyone mounted this bar to a car that didnt had it as stock ?

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#5
Found this. probably something like that.

[Image: undercarriage7.jpg]

For knowing your limit you have to pass it thumb
  Reply
#6
As I said in the earlier post, #679 (600 series) and #996 (900 series) have the instructions for new installations (not replacements). #679 is attached.

.pdf   679.pdf (Size: 133.51 KB / Downloads: 30)



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#7
(04-20-2019, 08:42 AM)Don C Wrote: As I said in the earlier post, #679 (600 series) and #996 (900 series) have the instructions for new installations (not replacements). #679 is attached.

Thanks Don my bad. I was in a hurry.

Thanks again :-)

For knowing your limit you have to pass it thumb
  Reply
#8
Hi

Has anyone a Picture of the swaybar installed ? Im having a hard time understanding the instructions..

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#9
The bar sits just like the one in the picture of the stock bar.

Mounts clamp in front of the axle on the spring as per the diagram, bar sits behind the axle. You connect the end links to the mounts and then raise the bar up to the frame to mark the location for the bushings. Drill holes in the frame and insert the u-bolts through the frame to secure the bushings and bar. You might have exhaust clearance issues, check that before drilling holes.


  Reply
#10
(08-10-2019, 01:05 PM)Hemikiller Wrote: The bar sits just like the one in the picture of the stock bar.

Mounts clamp in front of the axle on the spring as per the diagram, bar sits behind the axle. You connect the end links to the mounts and then raise the bar up to the frame to mark the location for the bushings. Drill holes in the frame and insert the u-bolts through the frame to secure the bushings and bar.  You might have exhaust clearance issues, check that before drilling holes.
Thanks, clearance issue is gonna be a problem. I dont Think I can squeeze it in.

For knowing your limit you have to pass it thumb
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear factory sway bar addition? cwalker509 3 129 10-09-2019, 03:39 PM
Last Post: Mister 4x4
  What colour factory sway bar 71-72 Mach 1s baz70 7 459 10-02-2019, 04:04 PM
Last Post: Rmach1
  Squeaky Leaf Springs/rear suspension andy72 4 173 09-22-2019, 12:08 PM
Last Post: Don C
  Sway bar Machvince 2 226 09-17-2019, 12:38 PM
Last Post: Machvince
  1973 mach 1 351 cleveland rear brakes Nige 9 467 07-29-2019, 06:04 PM
Last Post: Don C
  Rear Suspension Torque Specs 73pony 8 461 07-26-2019, 12:45 PM
Last Post: Carolina_Mountain_Mustangs
  Rear brakes hanging up. turtle5353 2 224 07-13-2019, 04:45 PM
Last Post: turtle5353
  Rear disc brake conversion issues Erik72 13 1,154 07-09-2019, 11:18 AM
Last Post: Don C



Users browsing this thread: 1 Guest(s)