• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear speakers
#1
I am putting a new radio in my 71 Mach 1 fastback. I know that rear speakers did not come in them factory. Can some of you show me some pics of finished product that have done that. Trying to figure out the grills and such. Thanks
  Reply
#2
Its pretty simple really. There are cut outs in the package tray. Remove the package tray cover and you will see them. Then you need to decide if you want to cut up the original cover or not. Personally I would order a new one and cut it up and keep the old one in a closet somewhere to preserve it.

You may need to enlarge the holes depending on the speakers you want to put in. You could do a fine job with some nice 6x9's or a nice component set in the back with the tweeters in the sail panel.

http://www.pro-touring.com/attachment.ph...1240416772

"I drank what?" - Socrates
  Reply
#3
There have been several posts about this and how members have solved it. I found this one, and several others, by searching the forum for "rear speakers":
https://www.7173mustangs.com/thread-rear-speakers?



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
runninpony 
I wonder where Convertible owners can put 6"X9" or other sizes in the rear without cutting up the interior panels?

71-73 Mustangs never die, they just go faster!
  Reply
#5
I don't have a picture that shows anything of the back speakers I put in my Mach...…….. and that was the intent, you can't see them. As these cars never had rear speakers, I wanted to keep them hidden. My car has a standard rear seat by the way.
Here's what I did; I bought a nice pair of 4"diam speakers. They will fit right into the steel frame. I bought a 4' x8' sheet of 1/8th" hardboard (had to buy a full sheet). I took the old package tray that some moron had fitted 6x9's in that looked like shit as a template and cut a couple of new blanks. Measured the hole locations and cut the two holes to the diameter of the cones, i.e. smaller than the OD of the speakers. Then I made up a frame out of 1/2" ply and screwed them to the board. That way there is more thickness to screw the speakers in to. This 'frame' will still fit into the steel without cutting it.
The material I found to cover it was sold as "generic automotive carpet" but actually is more like a thick felt like material and is almost see-though and perfect for letting sound through. The result is invisible rear speakers that have all the sound I want and the package tray looks somewhat stock to the casual viewer.
You will still need a double stereo speaker in the dash. NPD sell them as do others.
Just a suggestion if you don't want speakers showing.
Geoff.

I learn something new every day!
  Reply
#6
Have you looked at what Greg (Austin Vert) did?
https://www.7173mustangs.com/thread-aust...o-solution



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#7
Bah. You can rent either my Wife (SWMBO) or my MIL (SWMBATH) and put them in the back seat. You'll wish not to have a rear speaker at all after that.


SWMBO: She Who Must Be Obeyed
SWMBATH: She Who Must Be Attila The Hun

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
#8
runninpony 
(02-09-2019, 01:47 PM)midlife Wrote: Bah.  You can rent either my Wife (SWMBO) or my MIL (SWMBATH) and put them in the back seat.  You'll wish not to have a rear speaker at all after that.


SWMBO: She Who Must Be Obeyed
SWMBATH: She Who Must Be Attila The Hun

LOL, Randy you must be totally under the thumb  Tongue

71-73 Mustangs never die, they just go faster!
  Reply
#9
No matter how good the speakers are my SWMBO overrides them Smile



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#10
I mounted my 6x9 speakers under the metal package tray piece, that way I didn’t have to cut the metal piece. I then cut holes in the fiber board package tray piece and mounted the speaker grills to that.


Attached Files Thumbnail(s)
   

1973 Mach 1, Porsche Guards Red, 429/C6
1972 Mach 1, Grabber Blue, 302/C4, currently under construction
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  How does the rear seat back come out with fold down Carolina_Mountain_Mustangs 2 86 Yesterday, 06:31 PM
Last Post: Carolina_Mountain_Mustangs
Wrench Rear seatbelts A.Nilsson 4 217 02-14-2019, 01:32 PM
Last Post: A.Nilsson
  Mach 1/Fastback rear window replacement 71coop 9 400 01-16-2019, 07:19 AM
Last Post: 71coop
  Rear Louver Robsweden 9 495 12-24-2018, 04:56 AM
Last Post: timachone
  73 Mach 1 Rear Quarter Windows - Any Conversion Kits??? bytor2112 4 373 10-13-2018, 09:56 AM
Last Post: Carolina_Mountain_Mustangs
  Bucket seats in the rear. Rockinrednek 6 476 09-12-2018, 12:29 PM
Last Post: detritusmaximus
runninpony rear valance license plate bracket NOT A T5 3 349 09-07-2018, 03:24 AM
Last Post: NOT A T5
  Mach1 - interior upper rear panel to rear window Engine302 13 994 08-31-2018, 01:41 PM
Last Post: Mister 4x4



Users browsing this thread: 1 Guest(s)