• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear Louver
#1
Hi

I looking for louvers for my Mach 1

Ive found one at Summit racing and onther one at Astra Hammond. Has anyone tried one of theese ? Ive also read something about someone who modified a louver from a 70 to fit.

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#2
https://www.cjponyparts.com/rear-window-...973/p/RL5/
Here is what I have on mine, been happy with it.
  Reply
#3
The one at Summit looks to be the same as the one from CJ.

Biggest problem with louvers on the 71-3 sportsroof is the trunk lid hinges up over the bottom of the rear window. The lowest "slat" needs to be low enough to clear it, almost flat with the glass, or you have to lift the louver assembly to open the trunk. Hard to tell if either of those listed are correct in this regard, but it doesn't look like it. Might want to get 100% verification on that before shipping it to Sweden.

Whatever you do, skip the ABS plastic ones - yuck!


  Reply
#4
Here’s a side by side comparison of my 72 and a 70 with the louvers. See how mine doesn’t go all the way to the bottom of the window and the 70 does. They used to make a set of louvers for the 71-73’s that went all the way down, but not anymore. The only aluminum ones I could find are like the ones on my car. I still like them, plus they cover up my crappy scratched up rear window. And I don’t really think that they block any visibility. Hope this helps with your decision, Good luck!
   

run_horse Run Horse Run!
John 72 Q Code
  Reply
#5
Great thanks all :-)

The one I have seen IRL in sweden is a short version it doesnt cover the last piece of the window. So Il Think I go with the one from Summit :-)

Thanks all again

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#6
(12-21-2018, 12:28 PM)Robsweden Wrote: Great thanks all :-)

The one I have seen IRL in sweden is a short version it doesnt cover the last piece of the window. So Il Think I go with the one from Summit :-)

Thanks all again

Regards Rob
Rob, I believe the one from Summit is the same as on my Mach in the picture. I searched every place that sells them new and none go all the way to the bottom of the window. I wanted the old style too, but they just don’t make them anymore. I got these about 2-3 years ago, and I still have yet to see any like the old style.

run_horse Run Horse Run!
John 72 Q Code
  Reply
#7
Mine are from Summit Racing.  I added a small piece of windlace on each side of the bottom slat just in case the trunk lid reaches all the way up... but it doesn't.  The lid's full-open travel comes up a few millimeters short.  Better safe than sorry, though.

Sorry for the huge pic, but it's hard to see on the smaller version.

[Image: attachment.php?aid=48161]

Eric

[Image: mach1sig2.gif]
  Reply
#8
(12-21-2018, 01:41 PM)Mister 4x4 Wrote: Mine are from Summit Racing.  I added a small piece of windlace on each side of the bottom slat just in case the trunk lid reaches all the way up... but it doesn't.  The lid's full-open travel comes up a few millimeters short.  Better safe than sorry, though.

Thanks Il do something similar with windlace stuff. I Think the louver really adds the last finishing touch on the Mach 1

Regards Rob

For knowing your limit you have to pass it thumb
  Reply
#9
I have a pair of Hammond Louvers from the 1980's..  As described above, they do not allow the trunk to open the whole way/  I liked them aside from that fact.

If you have louvers like mine you can always put a little stop block in the trunk above the Hinges so the trunk stops before hitting the louvers.

kcmash
  Reply
#10
I bought the ones from Summit and they are perfect out of the box. Never had any clearance issues with the trunk lid!

Gesendet von meinem E6633 mit Tapatalk

Tim

Never drive faster than your guardian angel can fly Angel
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
Stang rear electric windows jimchil 6 274 08-29-2019, 04:03 PM
Last Post: Carolina_Mountain_Mustangs
  Front and Rear Seat Rebuild mustang7173 10 561 08-02-2019, 10:25 AM
Last Post: Carolina_Mountain_Mustangs
  Rear sail panels Newold 3 310 07-29-2019, 06:23 AM
Last Post: Hemikiller
  front sealing for rear door trim panel convertible 1971V8 4 235 07-22-2019, 06:08 AM
Last Post: mustang7173
bulb 3-point seat belt for fold down rear seats (ideas?) tony-muscle 4 256 07-02-2019, 02:46 PM
Last Post: mustang7173
  1973 Coupe Rear Seat mustang7173 3 326 06-06-2019, 02:26 PM
Last Post: mustang7173
  Rear fold down seat frame - what colour ? baz70 2 360 05-15-2019, 04:28 PM
Last Post: baz70
  Rear "Trap" Door Releases EdM 2 296 05-06-2019, 11:08 PM
Last Post: EdM



Users browsing this thread: 1 Guest(s)