• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rear end link bushings replacement
Since I had upgraded the front sway bar and bushings last year, I thought I would replace the rear sway bar end link bushings this year as they were getting compressed and out of shape.
I realize that the new bushings, rubber or polyurethane are going to be thicker / taller since they are new but was wondering if there was an easier way to get them on.

After stacking the bushings in the proper order over the threaded rod, washer, bushing, sway bar end, bushing, washer, spacer etc.. there was very little thread left to get the nut on.

Is there some method to put everything together and then get it compressed enough to get the nut started at least a few threads so that things can then be tightened? I finally got things together somehow but it took way longer than I expected.

Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  Best R12 replacement kcmash 14 296 5 hours ago
Last Post: donkost
  Rear electric widow motor jimchil 4 236 06-29-2019, 04:49 PM
Last Post: Carolina_Mountain_Mustangs
  Replacement Positive Battery Cable japrine 6 314 04-23-2019, 07:33 AM
Last Post: tony-muscle
  Rear Diff Leaking mpbsr 5 305 04-05-2019, 05:03 PM
Last Post: mpbsr
  Direction's flector replacement Jean-Pierre 8 552 03-14-2019, 09:27 AM
Last Post: Stanglover
  FMX transmission shifter seal replacement how to mach1000 15 6,689 01-20-2019, 04:08 PM
Last Post: Rbouwma
  73 rear bumper rjpohl 4 372 12-23-2018, 06:04 PM
Last Post: 6DUB606
  fuse link in ignition SteveO_71 6 439 11-28-2018, 05:08 AM
Last Post: NOT A T5

Users browsing this thread: 1 Guest(s)