• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rear end link bushings replacement
#1
Since I had upgraded the front sway bar and bushings last year, I thought I would replace the rear sway bar end link bushings this year as they were getting compressed and out of shape.
I realize that the new bushings, rubber or polyurethane are going to be thicker / taller since they are new but was wondering if there was an easier way to get them on.

After stacking the bushings in the proper order over the threaded rod, washer, bushing, sway bar end, bushing, washer, spacer etc.. there was very little thread left to get the nut on.

Is there some method to put everything together and then get it compressed enough to get the nut started at least a few threads so that things can then be tightened? I finally got things together somehow but it took way longer than I expected.

Thanks!
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1971-1973 Mustang 351C 2V Alternator Belt length (or link which to buy) Iku64 2 152 08-12-2019, 11:44 AM
Last Post: Iku64
  Best R12 replacement kcmash 19 586 07-23-2019, 09:27 AM
Last Post: Carolina_Mountain_Mustangs
  Rear electric widow motor jimchil 4 272 06-29-2019, 04:49 PM
Last Post: Carolina_Mountain_Mustangs
  Replacement Positive Battery Cable japrine 6 369 04-23-2019, 07:33 AM
Last Post: tony-muscle
  Rear Diff Leaking mpbsr 5 326 04-05-2019, 05:03 PM
Last Post: mpbsr
  Direction's flector replacement Jean-Pierre 8 587 03-14-2019, 09:27 AM
Last Post: Stanglover
  FMX transmission shifter seal replacement how to mach1000 15 6,884 01-20-2019, 04:08 PM
Last Post: Rbouwma
  73 rear bumper rjpohl 4 395 12-23-2018, 06:04 PM
Last Post: 6DUB606



Users browsing this thread: 1 Guest(s)